#PAGE_PARAMS# #ADS_HEAD_SCRIPTS# #MICRODATA#

GLAMbox: A Python toolbox for investigating the association between gaze allocation and decision behaviour


Authors: Felix Molter aff001;  Armin W. Thomas aff002;  Hauke R. Heekeren aff002;  Peter N. C. Mohr aff001
Authors place of work: WZB Berlin Social Science Center, Berlin, Germany aff001;  Center for Cognitive Neuroscience Berlin, Freie Universität Berlin, Berlin, Germany aff002;  Department of Education and Psychology, Freie Universität Berlin, Germany aff003;  School of Business and Economics, Freie Universität Berlin, Germany aff004;  Department of Electrical Engineering and Computer Science, Technische Universität Berlin, Berlin, Germany aff005;  Max Planck School of Cognition, Leipzig, Germany aff006
Published in the journal: PLoS ONE 14(12)
Category: Research Article
doi: https://doi.org/10.1371/journal.pone.0226428

Summary

Recent empirical findings have indicated that gaze allocation plays a crucial role in simple decision behaviour. Many of these findings point towards an influence of gaze allocation onto the speed of evidence accumulation in an accumulation-to-bound decision process (resulting in generally higher choice probabilities for items that have been looked at longer). Further, researchers have shown that the strength of the association between gaze and choice behaviour is highly variable between individuals, encouraging future work to study this association on the individual level. However, few decision models exist that enable a straightforward characterization of the gaze-choice association at the individual level, due to the high cost of developing and implementing them. The model space is particularly scarce for choice sets with more than two choice alternatives. Here, we present GLAMbox, a Python-based toolbox that is built upon PyMC3 and allows the easy application of the gaze-weighted linear accumulator model (GLAM) to experimental choice data. The GLAM assumes gaze-dependent evidence accumulation in a linear stochastic race that extends to decision scenarios with many choice alternatives. GLAMbox enables Bayesian parameter estimation of the GLAM for individual, pooled or hierarchical models, provides an easy-to-use interface to predict choice behaviour and visualize choice data, and benefits from all of PyMC3’s Bayesian statistical modeling functionality. Further documentation, resources and the toolbox itself are available at https://glambox.readthedocs.io.

Keywords:

Simulation and modeling – Probability distribution – Normal distribution – Prefrontal cortex – Sensory perception – Data visualization – Decision making

Introduction

A plethora of empirical findings has established an association between gaze allocation and decision behaviour on the group-level. For example, in value-based decision making, it has been repeatedly shown that longer gaze towards one option is associated with a higher choice probability for that option [113] and that external manipulation of gaze allocation changes choice probabilities accordingly [1, 9, 10, 14]. Such gaze bias effects are not limited to value-based decisions, but have recently also been observed in perceptual choices, where participants judge the perceptual attributes of stimuli based on available sensory information [14].

These findings have led to the development of a set of computational models, aimed at capturing the empirically observed association between gaze allocation and choice behaviour by utilizing gaze data to inform the momentary accumulation rates of diffusion decision processes [2, 7, 8, 1417]. Specifically, these models assume that evidence accumulation in favour of an item continues while it is not looked at, but at a discounted rate. The application of these models is limited so far, as fitting them to empirical data depends on computationally expensive simulations, involving the simulation of fixation trajectories. These simulations, as well as the creation of models of the underlying fixation process, become increasingly difficult with increasing complexity of the decision setting (e.g., growing choice set sizes or number of option attributes, etc). Existing approaches that circumvent the need for simulations, model the evidence accumulation process as a single diffusion process between two decision bounds and are therefore limited to binary decisions [2, 18].

However, researchers are increasingly interested in choice settings involving more than two alternatives. Choices outside the laboratory usually involve larger choice sets or describe items on multiple attributes. Besides, many established behavioural effects only occur in multi-alternative and multi-attribute choice situations [19].

Furthermore, recent findings indicate strong individual differences in the association between gaze allocation and choice behaviour [20, 21] as well as individual differences in the decision mechanisms used [15]. While the nature of individual differences in gaze biases is still not fully understood, different mechanisms have been suggested: Smith and Krajbich [20] showed that gaze bias differences can be related to individual differences in attentional scope (“tunnel vision”). Vaidya and Fellows [13] found stronger gaze biases in patients with damage in dorsomedial prefrontal cortex (PFC). Further, recent empirical work has investigated the roles of learning and attitude accessibility in gaze dependent decision making [22, 23]. However, more systematic investigations of these differences are needed, as the majority of model-based investigations of the relationship between gaze allocation and choice behaviour were focused on the group level, disregarding differences between individuals.

With the Gaze-weighted linear accumulator model (GLAM; [21]), we have proposed an analytical tool that allows the model-based investigation of the relationship between gaze allocation and choice behaviour at the level of the individual, in choice situations involving more than two alternatives, solely requiring participants’ choice, response time (RT) and gaze data, in addition to estimates of the items’ values.

Like the attentional Drift Diffusion Model (aDDM) [7, 8, 17], the GLAM assumes that the decision process is biased by momentary gaze behaviour: While an item is not fixated, its value representation is discounted. The GLAM, however, differs from the aDDM in other important aspects: In contrast to the aDDM, the fixation-dependent value signals are averaged across the trial, using the relative amount of time individuals spend fixating the items. This step abstracts away the specific sequence of fixations in a trial, that can be investigated with the aDDM. On the other hand, this simplification allows for the construction of trial-wise constant drift rates that can enter a basic stochastic race framework. While race models like the GLAM are not statistically optimal [24] the GLAM has been shown to provide a good fit to empirical data [21]. In general, race models have at least two practical advantages: First, they often have analytical solutions to their first-passage density distributions, and secondly, they naturally generalize to choice scenarios involving more than two alternatives. The analytical tractability of the race framework further allows for efficient parameter estimation in a hierarchical Bayesian manner. The GLAM thereby integrates gaze-dependent accumulation into a practical race model shell.

To make GLAM more accessible, we now introduce GLAMbox, a Python-based toolbox for the application of the GLAM to empirical choice, RT and gaze data. GLAMbox allows for individual and hierarchical estimation of the GLAM parameters, simulation of response data and model-based comparisons between experimental conditions and groups. It further contains a set of visualization functions to inspect choice and gaze data and evaluate model fit. We illustrate three application examples of the toolbox: In Example 1, we illustrate how GLAMbox can be used to analyze individual participant data with the GLAM. In particular, we perform an exemplary model comparison between multiple model variants on the individual level, as well as an out-of-sample prediction of participants’ choice and RT data. In Example 2, we demonstrate the application of the GLAM to perform a comparison of group-level parameters in a setting with limited amounts of data, using hierarchical parameter estimation. Lastly, in Example 3, we walk the reader through a step-by-step parameter recovery study with the GLAM, which is encouraged to increase confidence in the estimated parameter values.

Materials and methods

Gaze-weighted linear accumulator model details

Like the aDDM, the GLAM assumes that preference formation, during a simple choice process, is guided by the allocation of visual gaze (for an overview, see Fig 1). Particularly, the decision process is guided by a set of decision signals: An absolute and relative decision signal. Throughout the trial, the absolute signal of an item i can be in two states: An unbiased state, equal to the item’s value ri while the item is looked at, and a biased state while any other item is looked at, where the item value ri is discounted by a parameter γ. The average absolute decision signal A ¯ i is given by


where gi is defined as the fraction of total trial time that item i was looked at. If γ = 1, there is no difference between the biased and unbiased state, resulting in no influence of gaze allocation on choice behaviour. For γ values less than 1, the absolute decision signal Ai is discounted, resulting in generally higher choice probabilities for items that have been looked at longer. For γ values less than 0, the sign of the absolute decision signal Ai changes, when the item is not looked at, leading to an overall even stronger gaze bias, as evidence for these items is actively lost, when they are not looked at. This type of gaze-dependent leakage mechanism is supported by a variety of recent empirical findings [15, 21].

Gaze-weighted linear accumulator model.
Fig. 1. Gaze-weighted linear accumulator model.
In the GLAM, preference formation during the decision process is dependent on the allocation of visual gaze (A). For each item in the choice set, an average absolute decision signal A ¯ i is computed (dashed lines in A). The magnitude of this signal is determined by the momentary allocation of visual gaze: While an item is currently not looked at, its signal is discounted by parameter γ (γ ≤ 1; discounting is illustrated by gray arrows) (A). To determine a relative decision signal Ri for each item in the choice set, absolute evidence signals are transformed in two steps (B): First, the difference between each average absolute decision signal A ¯ i and the maximum of all others is determined. Second, the resulting differences are scaled through a logistic transform, as the GLAM assumes an adaptive representation of the relative decision signals that is especially sensitive to differences close to 0 (where the absolute signal for an item is very close to the maximum of all others). The resulting relative decision signals Ri can be used to predict choice and RT, by determining the speed of the accumulation process in a linear stochastic race (C). The stochastic race then provides first-passage time distributions pi, describing the likelihood of each item being chosen at each time point.

To determine the relative decision signals, the average absolute decision signals A ¯ i are transformed in two steps: First, for each item i, the relative evidence R i * is computed as the difference between the average absolute decision signal of the item A ¯ i (Eq 1) and the maximum of all other average absolute decision signals A ¯ j ≠ i (also obtained from Eq 2) is computed:


Second, the resulting difference signals R i * are scaled through a logistic transform s(x). The GLAM assumes an adaptive representation of the relative decision signals, which is maximally sensitive to small differences in the absolute decision signals close to 0 (where the difference between the absolute decision signal of an item and the maximum of all others is small):



The sensitivity of this transform is determined by the temperature parameter τ of the logistic function. Larger values of τ indicate stronger sensitivity to small differences in the average absolute decision signals A i ¯.

Unlike more traditional diffusion models (including the aDDM), the GLAM employs a linear stochastic race to capture response behaviour as well as RTs. The relative signals Ri enter a race process, where one item accumulator Ei is defined for each item in the choice set:


At each time step t, the amount of accumulated evidence is determined by the accumulation rate vRi, and zero-centered normally distributed noise with standard deviation σ. The velocity parameter v linearly scales the item drift rates in the race process and thereby affects the response times produced by the model: Lower values of v produce longer response times, larger vs result in shorter response times. A choice for an item is made as soon as one accumulator reaches the decision boundary b. To avoid underdetermination of the model, either the velocity parameter v, the noise parameter σ or the boundary has to be fixed. Similar to the aDDM, the GLAM fixes the boundary to a value of 1. The first passage time density fi(t) of a single linear stochastic accumulator Ei, with decision boundary b, is given by the inverse Gaussian distribution:



However, this density does not take into account that there are multiple accumulators in each trial racing towards the same boundary. For this reason, fi(t) must be corrected for the probability that any other accumulator crosses the boundary first. The probability that an accumulator crosses the boundary prior to t, is given by its cumulative distribution function Fi(t):


Here, Φ(x) defines the standard normal cumulative distribution function. Hence, the joint probability pi(t) that accumulator Ei crosses b at time t, and that no other accumulator Eji has reached b first, is given by:


Contaminant response model

To reduce the influence of erroneous responses (e.g., when the participant presses a button by accident or has a lapse of attention during the task) on parameter estimation, we include a model of contaminant response processes in all estimation procedures: In line with existing drift diffusion modelling toolboxes [25], we assume a fixed 5% rate of erroneous responses ϵ that is modeled as a participant-specific uniform likelihood distribution us(t). This likelihood describes the probability of a random choice for any of the N available choice items at a random time point in the interval of empirically observed RTs [25, 26]:


The resulting likelihood for participant s choosing item i, accounting for erroneous responses, is then given by:


The rate of error responses ϵ can be specified by the user to a different value than the default of 5% using the error_weight keyword in the make_model method (see below).

Individual parameter estimation details

The GLAM is implemented in a Bayesian framework using the Python library PyMC3 [27]. The model has four parameters (v, γ, σ, τ). By default, uninformative, uniform priors between sensible limits (derived from earlier applications to four different datasets: [21]) are placed on all parameters:


These limits were derived by extending the range of observed parameter estimates in earlier applications of the GLAM to four different empirical choice datasets. These datasets encompass data of 117 participants in value-based and perceptual choice tasks with up to three choice alternatives (including a wide range of possible response times, gaze bias strengths and choice accuracies; for further details [21]). Parameter estimates for these datasets are illustrated and summarised in S1 Table, S1 Fig and S1 Fig.

The velocity parameter v and the noise parameter σ must be strictly positive. Smaller v produce slower and less accurate responses (for constant σ), while smaller σ produce more accurate and slower responses (for constant v). The gaze bias parameter γ has a natural upper bound at 1 (indicating no gaze bias), while decreasing γ values indicate an increasing gaze bias strength. The sensitivity parameter τ has a natural lower bound at 0 (resulting in no sensitivity to differences in average absolute decision signals A ¯ i), with larger values indicating increased sensitivity.

Hierarchical parameter estimation details

For hierarchical models, individual parameters are assumed to be drawn from Truncated Normal distributions, parameterized by mean and standard deviation, over which weakly informative, Truncated Normal priors are assumed (based on the distribution of group level parameter estimates obtained from four different datasets in [21]; see Fig 2, S1 and S2 Figs and S1 Table):


Hierarchical model structure.
Fig. 2. Hierarchical model structure.
In the hierarchical model, individual subject parameters γi, vi. σi, and τi (subject plate) are drawn from Truncated Normal group level distributions with means μ and standard deviations σ (outside of the subject plate). Weakly informative Truncated Normal priors are placed on the group level parameters. RT and choice data xi,t for each trial t is distributed according to the subject parameters and the GLAM likelihood (Eq (8); inner trial plate).

Basic usage

Data format, the GLAM class

The core functionality of the GLAMbox is implemented in the GLAM model class. To apply the GLAM to data, an instance of the model class needs to be instantiated and supplied with the experimental data, first:

import glambox as gb

glam = gb.GLAM(data=data)

The data must be a pandas [28] DataFrame with one row per trial, containing the following variable entries:

  • subject: Subject index (integer, first subject should be 0)

  • trial: Trial index (integer, first trial should be 0)

  • choice: Chosen item in this trial (integer, items should be 0, 1, …, N)

  • rt: Response time (float, in seconds)

  • for each item i in the choice set:

    • item_value_i: The item value (float, we recommend to re-scale all item values to a range between 1 and 10 to allow comparison of parameter estimates between studies)

    • gaze_i: The fraction of total time in this trial that the participant spent looking at this item (float, between 0 and 1)

  • additional variables coding groups or conditions (string or integer)

For reference, the first two rows of a pandas DataFrame ready to be used with GLAMbox are shown in Table 1.

Tab. 1. The first two rows of a pandas DataFrame ready to be used with GLAM.
The first two rows of a pandas DataFrame ready to be used with GLAM.

Next, the respective PyMC3 model, which will later be used to estimate the model’s parameters, can be built using the make_model method. Here, the researcher specifies the kind of the model: ‘individual’ if the parameters should be estimated for each subject individually, ‘hierarchical’ for hierarchical parameter estimation, or ‘pooled’ to estimate a single parameter set for all subjects. At this stage, the researcher can also specify experimental parameter dependencies: For example, a parameter could be expected to vary between groups or conditions. In line with existing modeling toolboxes (e.g., [25, 29]) dependencies are defined using the depends_on argument. depends_on expects a dictionary with parameters as keys and experimental factors as values (e.g., depends_on=dict(v=’speed’) for factor ‘speed’ with conditions ‘fast’ and ‘slow’ in the data). The toolbox internally handles within- and between subject designs and assigns parameters accordingly. If multiple conditions are given for a factor, one parameter will be designated for each condition. Finally, the make_model method allows parameters to be fixed to a specific value using the *_val arguments (e.g., gamma_val=1 for a model without gaze bias). If parameters should be fixed for individual subjects, a list of individual values needs to be passed.

model.make_model(kind=‘individual’,

          depends_on=dict(v=‘speed’),

          gamma_val=1)

Inference

Once the PyMC3 model is built, parameters can be estimated using the fit method:

model.fit(method=‘MCMC’)

The fit method defaults to Markov-Chain-Monte-Carlo (MCMC; [30]) sampling, but also allows for Variational Inference (see below).

Markov-Chain-Monte-Carlo

MCMC methods approximate the Bayesian posterior parameter distributions, describing the probability of a parameter taking certain values given the data and prior probabilities, through repeated sampling. GLAMbox can utilize all available MCMC step methods provided by PyMC3. The resulting MCMC traces can be accessed using the trace attribute of the model instance (note that a list of traces is stored for models of kind ‘individual’). They should always be checked for convergence, to ascertain that the posterior distribution is approximated well. Both qualitative visual and more quantitative numerical checks of convergence, such as the Gelman-Rubin statistic R ^ and the number of effective samples are recommended (for detailed recommendations, see [31, 32]). PyMC3 contains a range of diagnostic tools to perform such checks (such as the summary function).

Variational inference

Estimation can also be done using all other estimation procedures provided in the PyMC3 library. This includes variational methods like Automatic Differentiation Variational Inference (ADVI; [33]). To use variational inference, the method argument can be set to ‘VI’, defaulting to the default variational method in PyMC3. We found variational methods to quickly yield usable, but sometimes inaccurate parameter estimates, and therefore recommend using MCMC for final analyses.

Accessing parameter estimates

After parameter estimation is completed, the resulting estimates can be accessed with the estimates attribute of the GLAM model instance. This returns a table with one row for each set of parameter estimates for each individual and condition in the data. For each parameter, a maximum a posteriori (MAP) estimate is given, in addition to the 95% Highest-Posterior Density Interval (HPD). If the parameters were estimated hierarchically, the table also contains estimates of the group-level parameters.

Comparing parameters between groups or conditions

Parameter estimates can be compared between different experimental groups or conditions (specified with the depends_on keyword when calling make_model) using the compare_parameters function from the analysis module. It takes as input the fitted GLAM instance, a list of parameters (‘v’, ‘s’, ‘gamma’, ‘tau’), and a list of pairwise comparisons between groups or conditions. The comparison argument expects a list of tuples (e.g., [(‘group1’, ‘group2’), (’group1’, ‘group3’)). For example, given a fitted model instance (here glam) a comparison of the γ parameter between two groups (group1 and group2) can be computed as:

from gb.analysis import compare_parameters

comparison = compare_parameters(model=glam,

                   parameters=[‘gamma’],

                   comparisons=[(‘group1’, ‘group2’)])

The function then returns a table with one row per specified comparison, and columns containing the mean posterior difference, percentage of the posterior above zero, and corresponding 95% HPD interval. If supplied with a hierarchical model, the function computes differences between group-level parameters. If an individual type model is given, it returns comparison statistics for each individual.

Comparisons can be visualized using the compare_parameters function from the plots module. It takes the same input as its analogue in the alysis module. It plots posterior distributions of parameters and the posterior distributions of any differences specified using the comparisons argument. For a usage example and plot see Example 2.

Comparing model variants

Model comparisons between multiple GLAM variants (e.g., full and restricted variants) can be performed using the compare_models function, which wraps the function of the same name from the PyMC3 library. The compare_models function takes as input a list of fitted model instances that are to be compared. Additional keyword arguments can be given and are passed on to the underlying PyMC3 compare function. This allows the user, for example, to specify the information criterion used for the comparison via the ic argument (‘WAIC’ or ‘LOO’ for Leave-One-Out cross validation). It returns a table containing an estimate of the specified information criterion, standard errors, difference to the best-fitting model, standard error of the difference, and other output variables from PyMC3 for each inputted model (and subject, if individually estimated models were given). We refer the reader to Example 1 for a usage example and exemplary output from the compare_models function.

Predicting choices and response times

Choices and RTs can be predicted with the GLAM by the use of the predict method:

model.predict(n_repeats=50)

For each trial of the dataset that is attached to the model instance, this method predicts a choice and RT according to Eq (10), using the previously determined MAP parameter estimates. To obtain a stable estimate of the GLAM’s predictions, as well as the noise contained within them, it is recommended to repeat every trial multiple times during the prediction. The number of trial repeats can be specified with the n_repeats argument. After the prediction is completed, the predicted data can be accessed with the prediction attribute of the model.

Results

Example 1: Individual level data & model comparison

Our first example is based on the study by [21]. Here, the authors study the association between gaze allocation and choice behaviour on the level of the individual. In particular, they explore whether (1) gaze biases are present on the individual level and (2) the strength of this association varies between individuals. In this example, we replicate this type of individual model-based analysis, including parameter estimation, comparison between multiple model variants, and out-of-sample prediction of choice and RT data.

Simulating data

First, we simulate a dataset containing 30 subjects, each performing 300 simple value-based choice trials. We assume that in each trial participants are asked to choose the item that they like most out of a set of three presented alternatives (e.g., snack food items; similar to the task described in [8]). While participants perform the task, their eye movements, choices and RTs are measured. Before completing the choice trials, participants were asked to indicate their liking rating for each of the items used in the choice task on a liking rating scale between 1 and 10 (with 10 indicating strong liking and 1 indicating little liking). The resulting dataset contains a liking value for each item in a trial, the participants’ choice and RT, as well as the participant’s gaze towards each item in a trial (describing the fraction of trial time that the participant spent looking at each item in the choice set).

To simulate individuals’ response behaviour, we utilize the parameter estimates that were obtained by [21] for the individuals in the three item choice dataset by [8] (see S1 Fig). Importantly, we assume that ten individuals do not exhibit a gaze bias, meaning that their choices are independent of the time that they spend looking at each item. To this end, we set the γ value of ten randomly selected individuals to 1. We further assume that individuals’ gaze is distributed randomly with respect to the values of the items in a choice set. An overview of the generating parameter estimates is given in S3 Fig.

We first instantiate a GLAM model instance using gb.GLAM() and then use its simulate_group method. This method requires us to specify whether the individuals of the group are either simulated individually (and thereby independent of one another) or as part of a group with hierarchical parameter structure (where the individual model parameters are drawn from a group distribution, see below). For the former, the generating model parameters (indicated in the following as gen_parameters) are provided as a dictionary, containing a list of the individual participant values for each model parameter:

import glambox as gb

import numpy as np

glam = gb.GLAM()

no_bias_subjects = np.random.choice(a=gen_parameters[’gamma’].size,

                     size=10,

                     replace=False)

gen_parameters[’gamma’][no_bias_subjects] = 1

glam.simulate_group(kind=’individual’,

            n_individuals=30,

            n_trials=300,

            n_items=3,

            parameters=gen_parameters)

As this example is focused on the individual level, we can further create a summary table, describing individuals’ response behaviour on three behavioural metrics, using the aggregate_subject_level_data function from the analysis module. The resulting table contains individuals’ mean RT, their probability of choosing the item with the highest item value from a choice set and a behavioural measure of the strength of the association between individuals’ gaze allocation and choice behaviour (indicating the mean increase in choice probability for an item that was fixated on longer than the others, after correcting for the influence of the item value on choice behaviour; for further details, see [21]).

from glambox.analysis import aggregate_subject_level_data

subject_data_summary = aggregate_subject_level_data(data=glam.data,

                              n_items=3)

Exploring the behavioural data

In a first step of our analysis, we explore differences in individuals’ response behaviour. To this end, we plot the distributions of individuals’ scores on the three behavioural metrics, and their associations, using the plot_behaviour_associations function implemented in the plots module:

gb.plots.plot_behaviour_associations(data=data)

The resulting plot is displayed in Fig 3 and shows that individuals’ probability of choosing the best item, as well as the strength of their behavioural association of gaze and choice, are not associated with their mean RT (Fig 3D and 3E). However, individuals’ probability of choosing the best item increases with decreasing strength of the behavioural association of gaze and choice (Fig 3F).

Individual differences in the data.
Fig. 3. Individual differences in the data.
A-C: distributions of individuals’ mean RT (A), probability of choosing the highest-valued item in a trial (B), and behavioural influence of gaze allocation on choice behaviour (C). D-F: associations between individuals’ probability of choosing the highest-valued item and mean RT (D), individuals’ behavioural influence of gaze allocation on choice behaviour and their mean RT (E), individuals’ behavioural influence of gaze allocation on choice behaviour and their probability of choosing the highest-valued item (F). Red lines indicate linear regression fits with confidence bands surrounding them. Pearson’s r coefficients with corresponding P-values are reported for each association in D-F.

Likelihood-based model comparison

In a second step of our analysis, we want to test whether the response behaviour of each individual is better described by a decision model with or without gaze bias. To this end, we set up the two GLAM variants:

glam_bias = gb.GLAM(data=data)

glam_bias.make_model(kind=’individual’, name=’glam_bias’)

glam_nobias = gb.GLAM(data=data)

glam_nobias.make_model(kind=’individual’, gamma_val=1, name=’glam_nobias’)

For the GLAM variant without gaze bias mechanism, we use the gamma_val argument and set it to a value of 1 (fixing γ to 1 for all subjects). We also assign different names to each model with the name attribute to better identify them in our subsequent analyses.

Subsequently, we fit both models to the data of each individual and compare their fit by means of the Widely Applicable Information Criterion (WAIC; [34]):

glam_bias.fit(method=’MCMC’,

        tune=5000,

        draws=5000,

        chains=4)

glam_nobias.fit(method=’MCMC’,

         tune=5000,

         draws=5000,

         chains=4)

The fit method defaults to Metropolis-Hastings MCMC sampling (for methodological details, see Methods Section). The draws argument sets the number of samples to be drawn. This excludes the tuning (or burn-in) samples, which can be set with the tune argument. In addition, the fit method accepts the same keyword arguments as the PyMC3 sample function, which it wraps (see the PyMC3 documentation for additional details). The chains argument sets the number of MCMC traces (it defaults to four and should be set to at least two, in order to allow convergence diagnostics).

After convergence has been established for all parameter traces (for details on the suggested convergence criteria, see Methods), we perform a model comparison on the individual level, using the compare_models function from the analysis (see Basic Usage: Comparing model variants):

comparison_df = gb.analysis.compare_models(models=[glam_bias, glam_nobias],

                          ic=’WAIC’)

The resulting table (shown in Table 2) can be used to identify the best fitting model (indicated by the lowest WAIC score) per individual.

Tab. 2. Output from compare_models function for the first two subjects.
Output from compare_models function for the first two subjects.

With this comparison, we are able to identify those participants whose response behaviour matches the assumption of gaze-biased evidence accumulation. In particular, we find that we accurately recover whether an individual has a gaze bias or not for 29 out of 30 individuals.

Looking at the individual parameter estimates (defined as MAP of the posterior distributions), we find that the individually fitted γ values (Fig 4A) cover a wide range between -0.8 and 1, indicating strong variability in the strength of individuals’ gaze bias. We also find that γ estimates have a strong negative correlation with individuals’ scores on the behavioural gaze bias measure (Fig 4B).

Individual differences in the strength of the association of gaze allocation and choice behaviour.
Fig. 4. Individual differences in the strength of the association of gaze allocation and choice behaviour.
A: Distribution of γ estimates resulting from the in-sample individual model fits. B: Association of γ estimates and individuals’ values on the behavioural gaze bias measure. The red line indicates a linear regression fit, with surrounding 95% confidence bands. Pearson’s r correlation with P-value is given.

Out-of-sample prediction

We have identified those participants whose response behaviour is better described by a GLAM variant with gaze-bias than one without. Yet, this analysis does not indicate whether the GLAM is a good model of individuals’ response behaviour on an absolute level. To test this, we perform an out-of-sample prediction exercise.

We divide the data of each subject into even- and odd-numbered experiment trials and use the data of the even-numbered trials to fit both GLAM variants:

glam_bias.exchange_data(data_even)

glam_bias.fit(method=’MCMC’,

        tune=5000,

        draws=5000,

        chains=4)

glam_nobias.exchange_data(data_even)

glam_nobias.fit(method=’MCMC’,

        tune=5000,

        draws=5000,

        chains=4)

Subsequently, we evaluate the performance of both models in predicting individuals’ response behaviour using the MAP estimates and item value and gaze data from the odd-numbered trials. To predict response behaviour for the odd-numbered trials, we use the predict method. We repeat every trial 50 times in the prediction (as specified through the n_repeats argument) to obtain a stable pattern of predictions:

glam_bias.exchange_data(data_odd)

glam_bias.predict(n_repeats=50)

glam_nobias.exchange_data(data_odd)

glam_nobias.predict(n_repeats=50)

Lastly, to determine the absolute fit of both model variants to the data, we plot the individually predicted against the individually observed data on all three behavioural metrics. To do this, we use the plot_individual_fit function of the plots module. This function takes as input the observed data, as well as a list of the predictions of all model variants that ought to be compared. The argument prediction_labels specifies the naming used for each model in the resulting figure. For each model variant, the function creates a row of panels, plotting the observed against the predicted data:

from glambox.plots import plot_individual_fit

plot_individual_fit(observed = data_odd,

            predictions=[glam_bias.prediction,

                   glam_nobias.prediction],

            prediction_labels=[’gaze-bias’,

                       ‘no gaze-bias’])

The resulting plot is displayed in Fig 5. We find that both model variants perform well in capturing individuals’ RTs and probability of choosing the best item (Fig 5A, 5D, 5B and 5E). Importantly, only the GLAM variant with gaze bias is able to also recover the strength of the association between individuals’ choice behaviour and gaze allocation (Fig 5C).

Out-of-sample model fits.
Fig. 5. Out-of-sample model fits.
Comparison of individuals’ simulated observed response behaviour with the out-of-sample predictions of a GLAM variant with (A-C) and without gaze bias (D-F): Individuals’ mean RT (A, D), probability of choosing the best item (B, E), and influence of gaze allocation on choice probability (C, F). Points indicate individual participant means.

Conclusion

GLAMbox provides an easy-to-use tool to test the presence (and variability) of gaze biases on the individual level. With GLAMbox, we can easily fit the GLAM to individual participant data, compare different model variants and predict individuals’ response behaviour. It also provides a set of analysis functions to explore behavioural differences between individuals and to compare the fit of different model variants to observed response behaviour.

Example 2: Hierarchical parameter estimation in cases with limited data

In some research settings, the total amount of data one can collect per individual is limited, conflicting with the large amounts of data required to obtain reliable and precise individual parameter estimates from diffusion models [35, 36]. Hierarchical modeling can offer a solution to this problem. Here, each individual’s parameter estimates are assumed to be drawn from a group level distribution. Thereby, during parameter estimation, individual parameter estimates are informed by the data of the entire group. This can greatly improve parameter estimation, especially in the face of limited amounts of data [25, 37]. In this example, we will simulate a clinical application setting, in which different patient groups are to be compared on the strengths of their gaze biases, during a simple value-based choice task that includes eye tracking. It is reasonable to assume that the amount of data that can be collected in such a setting is limited on at least two accounts:

  • The number of patients available for the experiment might be low

  • The number of trials that can be performed by each participant might be low, for clinical reasons (e.g., patients feel exhausted more quickly, time to perform tests is limited, etc.)

Therefore, we simulate a dataset with a low number of individuals within each group (between 5 and 15 per group), and a low number of trials per participant (50 trials). We then estimate model parameters in a hierarchical fashion, and compare the group level gaze bias parameter estimates between groups.

Simulating data

We simulate data of three patient groups (N1 = 5, N2 = 10, N3 = 15), with 50 trials per individual, in a simple three item value-based choice task, where participants are instructed to simply choose the item they like the best. These numbers are roughly based on a recent clinical study on the role of the prefrontal cortex in fixation-dependent value representations [13]. Here, the authors found no systematic differences between frontal lobe patients and controls on integration speed or the decision threshold, controlling speed-accuracy trade-offs. Therefore, in our example we only let the gaze bias parameter γ differ systematically between the groups, with means of γ1 = 0.7 (weak gaze bias), γ2 = 0.1 (moderate gaze bias) and γ3 = −0.5 (strong gaze bias), respectively. We do not assume any other systematic differences between the groups and sample all other model parameters from the estimates obtained from fitting the model to the data of [8] (for an overview of the generating parameters, see S4 Fig).

Behavioural differences between the three groups are plotted in Fig 6, using the plot_behaviour_aggregate function from the plots module. Group-level summary tables can be created using the aggregate_group_level_data from the analysis module. Even though the groups only differ in the gaze bias parameter, they also exhibit differences in RT (Group 1 mean ± s.d. = 1.96 ± 0.33 s, Group 2 mean ± s.d. = 2.38 ± 1.4 s; Group 3 mean ± s.d. = 2.59 ± 1.26 ms; Fig 6A) and choice accuracy (Group 1 mean ± s.d. = 0.88 ± 0.06, Group 2 mean ± s.d. = 0.71 ± 0.07, Group 3 mean ± s.d. = 0.50 ± 0.16; Fig 6B). As is to be expected, we can also observe behavioural differences in gaze influence measure (Group 1 mean ± s.d. = 0.08 ± 0.07, Group 2 mean ± s.d. = 0.26 ± 0.11, Group 3 mean ± s.d. = 0.38 ± 0.11; Fig 6C and 6D, where the choices of Group 3 are driven by gaze more than those of the other groups.

Aggregate view of the simulated data for Example 2.
Fig. 6. Aggregate view of the simulated data for Example 2.
(A) Mean RT binned by trial difficulty (the difference between the highest item value in a choice set and the maximum value of all other items). (B) The probability that an item is chosen based on its relative value (the difference of the item’s value and the maximum value of all other items in the choice set). (C) The probability of choosing an item based on its relative gaze (the difference between the gaze towards this item and the maximum gaze towards a different item). (D) The probability of choosing an item based on its relative gaze, when correcting for the influence of its value. Bars correspond to the pooled data, while coloured lines indicate individual groups.

Building the hierarchical model

When specifying the hierarchical model, we allow all model parameters to differ between the three groups. This way, we will subsequently be able to address the question whether individuals from different groups differ on one or more model parameters (including the gaze bias parameter γ, which we are mainly interested in here). As for the individual models, we first initialize the model object using the GLAM class and supply it with the behavioural data using the data argument. Here, we set the model kind to ‘hierarchical’ (in contrast to ‘individual’). Further, we specify that each model parameter can vary between groups (referring to a ‘group’ variable in the data):

hglam = gb.GLAM(data=data)

hglam.make_model(kind=’hierarchical’,

          depends_on = dict(v=’group’,

                    gamma=’group’,

                    s=’group’,

                    tau=’group’))

In this model, each parameter is set up hierarchically within each group, so that individual estimates are informed by other individuals in that group. If the researcher does not expect group differences on a parameter, this parameter can simply be omitted from the depends_on dictionary. The resulting model would then have a hierarchical setup of this parameter across groups, so that individual parameter estimates were informed by all other individuals (not only those in the same group).

Parameter estimation with MCMC

After the model is built, the next step is to perform statistical inference over its parameters. As we have done with the individual models, we can use MCMC to approximate the parameters’ posterior distributions (see Methods for details). Due to the more complex structure and drastically increased number of parameters, the chains from the hierarchical model usually have higher levels autocorrelation. To still obtain a reasonable number of effective samples [32], we increase the number of tuning- and draw steps:

hglam.fit(method=’MCMC’,

      draws=20000,

      tune=20000,

      chains=4)

Evaluating parameter estimates, interpreting results

After sampling is finished, and the chains were checked for convergence, we can turn back to the research question: Do the groups differ with respect to their gaze biases? Questions about differences between group-level parameters can be addressed by inspecting their posterior distributions. For example, the probability that the mean γ1,μ for Group 1 is larger than the mean γ2,μ of Group 2 is given by the proportion of posterior samples in which this was the case.

GLAMbox includes a compare_parameters function that plots posterior distributions of group level parameters. Additionally, the user can specify a list of comparisons between groups or conditions. If comparisons are specified, the posterior distributions of their difference and corresponding relevant statistics are added to the figure:

from glambox.plots import compare_parameters

parameters = [’v’, ‘gamma’, ‘s’, ‘tau’]

comparisons = [(’group1’, ‘group2’),

        (’group1’, ‘group3’),

        (’group2’, ‘group3’)]

compare_parameters(model=hglam,

           parameters=parameters,

           comparisons=comparisons)

With the resulting plot (Fig 7), the researcher can infer that the groups did not differ with respect to their mean velocity parameters vi,μ (top row, pairwise comparisons), mean accumulation noise σi,μ (third row), or scaling parameters τi,μ. The groups differ, however, in the strength of their mean gaze bias γi,μ (second row): All differences between the groups were statistically meaningful (as inferred by the fact that the corresponding 95% HPD did not contain zero; second row, columns 2-4).

Pairwise comparison of posterior group-level parameter estimates between groups.
Fig. 7. Pairwise comparison of posterior group-level parameter estimates between groups.
Each row corresponds to one model parameter. The leftmost column shows the estimated posterior distributions for each parameter and group. Pairwise differences between the group posterior distributions are shown in all other columns. For each posterior distribution of the difference, the mean and 95% HPD are indicated, as well as the proportion of samples below and above zero (in red). All three groups differ on the γ parameter (row B). No evidence for differences on any of the other model parameters is found (the 95% HPD of the pairwise differences between groups all include zero).

Conclusion

When faced with limited data, GLAMbox allows users to easily build and estimate hierarchical GLAM variants, including conditional dependencies of model parameters. The Bayesian inference framework allows the researcher to answer relevant questions in a straightforward fashion. To this end, GLAMbox provides basic functions for computation and visualization.

Example 3: Parameter recovery

When performing model-based analyses of behaviour that include the interpretation of parameter estimates, or comparisons of parameter estimates between groups or conditions, the researcher should be confident that the model’s parameters are actually identifiable. In particular, the researcher needs to be confident that the set of estimated parameters unambiguously describes the observed data better than any other set of parameters. A straightforward way of testing this is to perform a parameter recovery: The general intuition of a parameter recovery analysis is to first generate a synthetic dataset from a model using a set of known parameters, and then fitting the model to the synthetic data. Finally, the estimated parameters can be compared to the known generating parameters. If they match to a satisfying degree, the parameters were recovered successfully. Previous analyses have already indicated that the GLAM’s parameters can be recovered to a satisfying degree [21]. Yet, the ability to identify a given set of parameters always depends on the specific features of a given dataset. The most obvious feature of a dataset that influences recoverability of model parameters is the number of data points included. Usually this quantity refers to the number of trials that participants performed. For hierarchical models, the precision of group-level estimates also depends on the number of individuals per group. Additional features that vary between datasets and that could influence parameter estimation are the observed distribution of gaze, the distribution of item values or the number of items in each trial. For this reason, it is recommended to test whether the estimated parameters of a model can be recovered in the context of a specific dataset. slac To demonstrate the procedure of a basic parameter recovery analysis using GLAMbox, suppose we have collected and loaded a dataset called data. In the first step, we perform parameter estimation as in the previous examples:

glam = gb.GLAM(data=data)

glam.make_model(kind=’individual’)

glam.fit(method=’MCMC’,

     draws=5000,

     tune=5000,

     chains=4)

The next step is to create a synthetic, model-generated dataset using the model parameters estimated from the empirical data, together with the empirically observed stimulus and gaze data using the predict method. Setting n_repeats to 1 results in a dataset of the same size as the observed one:

glam.predict(n_repeats=1)

synthetic = glam.prediction

The synthetic dataset should resemble the empirically observed data closely. If there are major discrepancies between the synthetic and observed data, this indicates that GLAM might not be a good candidate model for the data at hand. Next, we create a new model instance, attach the synthetic data, build a model and re-estimate its parameters:

glam_rec = gb.GLAM(data=synthetic)

glam_rec.make_model(kind=’individual’)

glam_rec.fit(method=’MCMC’,

        draws=5000,

        tune=5000,

        chains=4)

Finally, the recovered and generating parameters can be compared. If the recovered parameters do not match the generating parameters, the parameters cannot be identified given this specific dataset. In this case, parameter estimates should not be interpreted.

If, on the other hand, generating and recovered parameters do align, the parameters have been recovered successfully. This indicates that the model’s parameters can be identified unambiguously given the general characteristics of the dataset and thereby increases confidence that the parameters obtained from the empirical data are valid and can be interpreted.

Here, all parameters could be recovered as illustrated in Fig 8. For most individuals, the MAP estimates and their 95% HPDs are close to the known generating parameters. Across individuals, no systematic biases in the estimation can be identified.

Results from a basic parameter recovery.
Fig. 8. Results from a basic parameter recovery.
The lower row (E-H) shows deviations between known generating parameter values and recovered MAP estimates (circles) and their 95% HPDs (horizontal error bars) for each participant. Green (red) colour indicates that the true value is within (outside) the 95% HPD. Most parameters were recovered with small deviations. Panels A-D show distributions of deviations across individuals. Distributions are mostly centered around zero, indicating no systematic under- or overestimation (bias) across individuals.

Conclusion

In this example, we demonstrated how to perform a basic parameter recovery for a given dataset. When successful, this increases confidence that the parameters can be identified with the given dataset.

Discussion

Researchers have recently started to systematically investigate the role of visual gaze in the decision making process. By now, it is established that eye movements do not merely serve to sample information that is then processed independently to produce a choice, but that they are actively involved in the construction of preferences [2, 4, 68, 10, 14, 15, 21, 38]. The dominant theoretical perspective is that evidence accumulation in favor of each option is modulated by gaze allocation, so that accumulation for non-fixated options is attenuated. This mechanism is formally specified in various models of gaze-dependent decision making, such as the attentional Drift Diffusion Model (aDDM; [7, 8]) and the conceptually related Gaze-weighted Linear Accumulator Model (GLAM; [21]). In contrast to analyses based on behavioural and eye tracking data alone, these models can act as analytical tools that enable researchers to address questions regarding specific mechanisms in the decision process, like the gaze bias.

The goal of GLAM is to provide a model-based estimate of the gaze bias on the level of an individual (as indicated by GLAM’s γ parameter), in choice situations involving more than two choice alternatives. To estimate the gaze bias, GLAM describes the decision process in the form of a linear stochastic race and aggregates over the specific sequence of fixations during the decision process (by only utilizing the fraction of the decision time that each item was looked at). These two characteristics distinguish the GLAM from other existing approaches of obtaining an estimate of individuals’ gaze bias:

First, the GLAM is focused on quantifying the gaze bias on the individual level. It does not capture dynamics of the decision process on the level of single fixations. If these fine-grained dynamics are of interest to the researcher, the aDDM can be used. Here, the fixation-dependent changes in evidence accumulation rates throughout the trial are not averaged out. Keeping this level of detail, however, comes at a cost: Fitting the aDDM relies on extensive model simulations (including a simulation of the fixation process; for a more detailed discussion see [21]). The GLAM, on the other hand, aggregates over the fixation-dependent changes in the accumulator’s drift rate in order to simplify the estimation process of the gaze bias.

Second, the GLAM directly applies to choice situations involving more than two choice alternatives. While the GLAM has been shown to also capture individuals’ gaze bias and choice behaviour well in two-alternative choice situations [21], there exist other computational approaches that can estimate the gaze bias of an individual in binary decisions: If response times are of interest to the researcher, the gaze bias can be estimated in the form of a gaze-weighted DDM (see for example [2, 18]). Similar to the GLAM, this approach also aggregates over the dynamics of the fixation process within a trial, by only utilizing the fraction of trial time that each item was looked at. In contrast to the GLAM, however, gaze-weighted DDM approaches describe the decision process in the form of a single accumulator that evolves between two decision bounds (each representing one of the two choice alternatives). For two-alternative choice scenarios, where response times are not of interest to the researcher, Smith and colleagues [39] proposed a method of estimating the aDDM gaze-bias parameter through a random utility model. Here, the gaze bias can be estimated in a simple logit model.

Even though the advantages of applying these types of models are apparent, their use is often limited by their complexity and the high cost of implementing, validating and optimizing them. Further, there are only few off-the-shelf solutions researchers can turn to, if they want to perform model-based analyses of gaze-dependent choice data, particularly for choice settings involving more than two alternatives.

With GLAMbox, we present a Python-based toolbox, built on top of PyMC3, that allows researchers to perform model-based analyses of gaze-bias effects in decision making easily. We have provided step-by-step instructions and code to perform essential modeling analyses using the GLAM. These entail application of the GLAM to individual and group-level data, specification of parameter dependencies for both within- and between-subject designs, (hierarchical) Bayesian parameter estimation, comparisons between multiple model variants, out-of-sample prediction of choice and RT data, data visualization, Bayesian comparison of posterior parameter estimates between conditions, and parameter recovery. We hope that GLAMbox will make studying the association between gaze allocation and choice behaviour more accessible. We also hope that the resulting findings will ultimately help us better understand this association, its inter-individual variability and link to brain activity.

Supporting information

S1 Fig [tiff]
Distribution of individual parameter estimates from four datasets analysed in Thomas et al. (2019).

S2 Fig [m]
Illustration of hyperpriors.

S3 Fig [tiff]
Distribution of individual generating GLAM parameters of Example 1.

S4 Fig [tiff]
Distributions of data-generating parameters for the three groups in Example 2.

S1 Table [pdf]
Description of individual parameter estimates from four datasets analysed in Thomas et al. (2019).


Zdroje

1. Armel KC, Beaumel A, Rangel A. Biasing simple choices by manipulating relative visual attention. Judgment and Decision Making. 2008;3:396–403.

2. Cavanagh JF, Wiecki TV, Kochar A, Frank MJ. Eye tracking and pupillometry are indicators of dissociable latent decision processes. Journal of Experimental Psychology: General. 2014;143(4):1476–1488. doi: 10.1037/a0035813

3. Fiedler S, Glöckner A. The Dynamics of Decision Making in Risky Choice: An Eye-Tracking Analysis. Frontiers in Psychology. 2012;3. doi: 10.3389/fpsyg.2012.00335

4. Folke T, Jacobsen C, Fleming SM, De Martino B. Explicit representation of confidence informs future value-based decisions. Nature Human Behaviour. 2017;1(1):0002. doi: 10.1038/s41562-016-0002

5. Glöckner A, Herbold AK. An eye-tracking study on information processing in risky decisions: Evidence for compensatory strategies based on automatic processes. Journal of Behavioral Decision Making. 2011;24(1):71–98. doi: 10.1002/bdm.684

6. Konovalov A, Krajbich I. Gaze data reveal distinct choice processes underlying model-based and model-free reinforcement learning. Nature Communications. 2016;7:12438. doi: 10.1038/ncomms12438 27511383

7. Krajbich I, Armel C, Rangel A. Visual fixations and the computation and comparison of value in simple choice. Nature Neuroscience. 2010;13(10):1292–1298. doi: 10.1038/nn.2635 20835253

8. Krajbich I, Rangel A. Multialternative drift-diffusion model predicts the relationship between visual fixations and choice in value-based decisions. Proceedings of the National Academy of Sciences. 2011;108(33):13852–13857. doi: 10.1073/pnas.1101328108

9. Pärnamets P, Johansson P, Hall L, Balkenius C, Spivey MJ, Richardson DC. Biasing moral decisions by exploiting the dynamics of eye gaze. Proceedings of the National Academy of Sciences. 2015;112(13):4170–4175. doi: 10.1073/pnas.1415250112

10. Shimojo S, Simion C, Shimojo E, Scheier C. Gaze bias both reflects and influences preference. Nature Neuroscience. 2003;6(12):1317–1322. doi: 10.1038/nn1150 14608360

11. Stewart N, Gächter S, Noguchi T, Mullett TL. Eye Movements in Strategic Choice. Journal of Behavioral Decision Making. 2016;29(2-3):137–156. doi: 10.1002/bdm.1901 27513881

12. Stewart N, Hermens F, Matthews WJ. Eye Movements in Risky Choice. Journal of Behavioral Decision Making. 2016;29(2-3):116–136. doi: 10.1002/bdm.1854 27522985

13. Vaidya AR, Fellows LK. Testing necessary regional frontal contributions to value assessment and fixation-based updating. Nature Communications. 2015;6: 10120. doi: 10.1038/ncomms10120

14. Tavares G, Perona P, Rangel A. The Attentional Drift Diffusion Model of Simple Perceptual Decision-Making. Frontiers in Neuroscience. 2017;11. doi: 10.3389/fnins.2017.00468 28894413

15. Ashby NJS, Jekel M, Dickert S, Glöckner A. Finding the right fit: A comparison of process assumptions underlying popular drift-diffusion models. Journal of Experimental Psychology: Learning, Memory, and Cognition. 2016;42(12):1982–1993. doi: 10.1037/xlm0000279 27336785

16. Fisher G. An attentional drift diffusion model over binary-attribute choice. Cognition. 2017;168:34–45. doi: 10.1016/j.cognition.2017.06.007 28646751

17. Krajbich I, Lu D, Camerer C, Rangel A. The Attentional Drift-Diffusion Model Extends to Simple Purchasing Decisions. Frontiers in Psychology. 2012;3. doi: 10.3389/fpsyg.2012.00193

18. Lopez-Persem A, Domenech P, Pessiglione M. How prior preferences determine decision-making frames and biases in the human brain. eLife. 2016;5:e20317. doi: 10.7554/eLife.20317 27864918

19. Trueblood JS, Brown SD, Heathcote A, Busemeyer JR. Not Just for Consumers: Context Effects Are Fundamental to Decision Making. Psychological Science. 2013;24(6):901–908. doi: 10.1177/0956797612464241 23610134

20. Smith SM, Krajbich I. Attention and choice across domains. Journal of Experimental Psychology: General. 2018;147(12):1810–1826. doi: 10.1037/xge0000482

21. Thomas AW, Molter F, Krajbich I, Heekeren HR, Mohr PNC. Gaze bias differences capture individual choice behaviour. Nature Human Behaviour. 2019;3(6):625–635. doi: 10.1038/s41562-019-0584-8 30988476

22. Cavanagh SE, Malalasekera WMN, Miranda B, Hunt LT, Kennerley SW. Visual Fixation Patterns during Economic Choice Reflect Covert Valuation Processes That Emerge with Learning. Proceedings of the National Academy of Sciences. 2019; p. 201906662.

23. Gwinn R, Krajbich I. Attitudes and Attention. Journal of Experimental Social Psychology. 2020;86:103892. doi: 10.1016/j.jesp.2019.103892

24. Bogacz R, Brown E, Moehlis J, Holmes P, Cohen JD. The Physics of Optimal Decision Making: A Formal Analysis of Models of Performance in Two-Alternative Forced-Choice Tasks. Psychological review. 2006;113(4):700. doi: 10.1037/0033-295X.113.4.700 17014301

25. Wiecki TV, Sofer I, Frank MJ. HDDM: Hierarchical Bayesian estimation of the Drift-Diffusion Model in Python. Frontiers in Neuroinformatics. 2013;7. doi: 10.3389/fninf.2013.00014 23935581

26. Ratcliff R, Tuerlinckx F. Estimating parameters of the diffusion model: Approaches to dealing with contaminant reaction times and parameter variability. Psychonomic Bulletin & Review. 2002;9(3):438–481. doi: 10.3758/BF03196302

27. Salvatier J, Wiecki TV, Fonnesbeck C. Probabilistic programming in Python using PyMC3. PeerJ Computer Science. 2016;2:e55. doi: 10.7717/peerj-cs.55

28. McKinney W. Data structures for statistical computing in python. In: Proceedings of the 9th Python in Science Conference. vol. 445. Austin, TX; 2010. p. 51–56.

29. Voss A, Voss J. Fast-dm: A free program for efficient diffusion model analysis. Behavior Research Methods. 2007;39(4):767–775. doi: 10.3758/bf03192967 18183889

30. Gamerman D, Lopes HF. Markov Chain Monte Carlo: Stochastic Simulation for Bayesian Inference, Second Edition. Chapman and Hall/CRC; 2006.

31. Gelman A, Shirley K. Inference from Simulations and Monitoring Convergence. In: Handbook of Markov Chain Monte Carlo. Chapman and Hall/CRC; 2011. p. 189–200.

32. Kruschke J. Doing Bayesian data analysis: A tutorial with R, JAGS, and Stan. Academic Press; 2014.

33. Kucukelbir A, Tran D, Ranganath R, Gelman A, Blei DM. Automatic differentiation variational inference. The Journal of Machine Learning Research. 2017;18(1):430–474.

34. Vehtari A, Gelman A, Gabry J. Practical Bayesian model evaluation using leave-one-out cross-validation and WAIC. Statistics and Computing. 2017;27(5):1413–1432. doi: 10.1007/s11222-016-9696-4

35. Lerche V, Voss A, Nagler M. How many trials are required for parameter estimation in diffusion modeling? A comparison of different optimization criteria. Behavior Research Methods. 2017;49(2):513–537. doi: 10.3758/s13428-016-0740-2 27287445

36. Voss A, Nagler M, Lerche V. Diffusion Models in Experimental Psychology. Experimental Psychology. 2013;60(6):385–402. doi: 10.1027/1618-3169/a000218 23895923

37. Ratcliff R, Childers R. Individual Differences and Fitting Methods for the Two-Choice Diffusion Model of Decision Making. Decision (Washington, DC). 2015;2015.

38. Orquin JL, Mueller Loose S. Attention and choice: A review on eye movements in decision making. Acta Psychologica. 2013;144(1):190–206. doi: 10.1016/j.actpsy.2013.06.003 23845447

39. Smith SM, Krajbich I, Webb R. Estimating the dynamic role of attention via random utility. Journal of the Economic Science Association. 2019; p. 1–15.


Článek vyšel v časopise

PLOS One


2019 Číslo 12
Nejčtenější tento týden
Nejčtenější v tomto čísle
Kurzy Podcasty Doporučená témata Časopisy
Přihlášení
Zapomenuté heslo

Zadejte e-mailovou adresu, se kterou jste vytvářel(a) účet, budou Vám na ni zaslány informace k nastavení nového hesla.

Přihlášení

Nemáte účet?  Registrujte se

#ADS_BOTTOM_SCRIPTS#