Structural and Biochemical Characterization of SrcA, a Multi-Cargo Type III Secretion Chaperone in Required for Pathogenic Association with a Host

Many Gram-negative bacteria colonize and exploit host niches using a protein apparatus called a type III secretion system (T3SS) that translocates bacterial effector proteins into host cells where their functions are essential for pathogenesis. A suite of T3SS-associated chaperone proteins bind cargo in the bacterial cytosol, establishing protein interaction networks needed for effector translocation into host cells. In Salmonella enterica serovar Typhimurium, a T3SS encoded in a large genomic island (SPI-2) is required for intracellular infection, but the chaperone complement required for effector translocation by this system is not known. Using a reverse genetics approach, we identified a multi-cargo secretion chaperone that is functionally integrated with the SPI-2-encoded T3SS and required for systemic infection in mice. Crystallographic analysis of SrcA at a resolution of 2.5 Å revealed a dimer similar to the CesT chaperone from enteropathogenic E. coli but lacking a 17-amino acid extension at the carboxyl terminus. Further biochemical and quantitative proteomics data revealed three protein interactions with SrcA, including two effector cargos (SseL and PipB2) and the type III-associated ATPase, SsaN, that increases the efficiency of effector translocation. Using competitive infections in mice we show that SrcA increases bacterial fitness during host infection, highlighting the in vivo importance of effector chaperones for the SPI-2 T3SS.

Published in the journal: . PLoS Pathog 6(2): e32767. doi:10.1371/journal.ppat.1000751
Category: Research Article
doi: 10.1371/journal.ppat.1000751


Many Gram-negative bacteria colonize and exploit host niches using a protein apparatus called a type III secretion system (T3SS) that translocates bacterial effector proteins into host cells where their functions are essential for pathogenesis. A suite of T3SS-associated chaperone proteins bind cargo in the bacterial cytosol, establishing protein interaction networks needed for effector translocation into host cells. In Salmonella enterica serovar Typhimurium, a T3SS encoded in a large genomic island (SPI-2) is required for intracellular infection, but the chaperone complement required for effector translocation by this system is not known. Using a reverse genetics approach, we identified a multi-cargo secretion chaperone that is functionally integrated with the SPI-2-encoded T3SS and required for systemic infection in mice. Crystallographic analysis of SrcA at a resolution of 2.5 Å revealed a dimer similar to the CesT chaperone from enteropathogenic E. coli but lacking a 17-amino acid extension at the carboxyl terminus. Further biochemical and quantitative proteomics data revealed three protein interactions with SrcA, including two effector cargos (SseL and PipB2) and the type III-associated ATPase, SsaN, that increases the efficiency of effector translocation. Using competitive infections in mice we show that SrcA increases bacterial fitness during host infection, highlighting the in vivo importance of effector chaperones for the SPI-2 T3SS.


Many Gram-negative bacteria that colonize host animals use a type III secretion system (T3SS) to deliver effector proteins directly into host cells where their interaction with host proteins and membranes contribute to pathogenesis. Comprised of over 20 proteins, T3SS are complex structures with relation to the flagellar T3SS [1],[2] and include several central features; (i) inner and outer membrane ring structures, (ii) an extracellular needle structure with pore-forming proteins at the distal tip that engage a host cell membrane, (iii) an ATPase at the base of the apparatus with energetic and chaperone-effector recruitment roles, and (iv) a suite of chaperones to coordinate the assembly and function of the apparatus during infection.

Secretion chaperones are proteins required for T3SS function with roles in apparatus assembly and effector delivery, but are not themselves subject to secretion [3]. These chaperones often have common physical features such as low molecular weight (<15 kDa), an acidic isoelectric point and a predicted amphipathic helix at the carboxyl terminus. Current literature groups secretion chaperones into three classes based on their physical interactions with cargo [3],[4]. Class I chaperones bind to translocated effector proteins at a chaperone binding domain (CBD) located in the amino terminus of the effector. Class I chaperones have a structural fold of five β-strands and three α-helices, forming homodimers that bind to the CBD in a horseshoe-like structure. These chaperones have been further sub-classified based on their substrate repertoire and location with respect to the genes encoding the T3SS [3]. Class II chaperones bind to translocon proteins that make up the secretion pore in the host target membrane and class III chaperones bind the extracellular filament proteins (or flagellin rod in the orthologous flagellar system) that polymerize into a helical structure following secretion from the bacterial cell. Secondary structure predictions suggest class III chaperones adopt an extended alpha helical structure, which was confirmed by the crystal structure of the CesA chaperone in enteropathogenic E. coli that binds the EspA filament protein [5].

Much of the virulence potential of Salmonella enterica, a group of more than 2300 serotypes, is attributed to horizontally acquired genomic islands termed Salmonella Pathogenicity Islands (SPI). SPI-1 encodes a T3SS required for host cell invasion and SPI-2 encodes a second T3SS needed for intracellular survival and immune evasion [6],[7]. To date, 13 effectors have been identified as substrates of the SPI-1 T3SS and 21 effectors for the SPI-2 T3SS, although the chaperones orchestrating the latter system have been elusive. Whereas 80% of the effectors of the SPI-1 system have defined chaperones, only two effector-chaperone interactions are known for the SPI-2 system. These include the effector-chaperone pair of SseF-SscB, and the chaperone SseA that binds translocon components SseD and SseB [8],[9],[10]. Crystal structures have been determined for three chaperones that coordinate translocation of effectors through the SPI-1 T3SS (InvB [11], SicP [12] and SigE [13]). However no structures are available for the SPI-2 T3SS chaperones whose effector repertoire seems considerably larger than that of the SPI-1 system.

In addition to maintaining a region of localized effector unfolding [12], T3SS chaperones have an emerging role as escorts that deliver their cargo to the cytoplasmic face of the inner membrane through physical interactions with an ATPase. These ATPases form a hexameric structure at the base of the T3SS [14] and are a conserved feature of both flagellar and non-flagellar type III systems to enhance secretion activity by promoting chaperone release and effector unfolding prior to secretion [15],[16],[17]. A chaperone-ATPase interaction for the SPI-2 T3SS has not been described previously and so whether this system conforms to the emerging escort paradigm is not known.

The regulation of the SPI-2 T3SS and its associated effector genes is coordinated by environmental cues signifying the intracellular environment [18]. These cues activate a two-component signaling system encoded in the SPI-2 island comprising the SsrA sensor kinase and SsrB response regulator. In addition to activating all of the T3SS structural operons, transcriptional profiling has uncovered new genes in the SsrB regulon that are required for bacterial pathogenesis including a translocated effector, SseL [19],[20], and a gene of unknown function called srfN that is common to the Salmonella genus [21]. Using a reverse genetics approach we identified an SsrB-regulated gene (STM2138) that we named srcA (SsrB-regulated chaperone A), whose gene product satisfied several a priori predictions relating to the physical properties associated with T3SS chaperones. We solved the crystal structure of SrcA and performed additional biochemical, proteomic and in vivo experiments that revealed SrcA to be a class I chaperone required for bacterial fitness in the host environment. Despite being genetically disconnected from SPI-2, SrcA is integrated functionally with this system by binding to the T3SS ATPase, SsaN, and providing chaperone activity towards two important effectors, SseL (STM2287) and PipB2 (STM2780), necessary for immune escape and cell-to-cell transmission. These data reveal structural and biochemical insight into a T3SS secretion chaperone required for intracellular pathogenesis of Salmonella.


Identification of an SsrB-regulated secretion chaperone

Transcriptional profiling of SsrB-regulated genes in S. enterica serovar Typhimurium (S. Typhimurium) [22] identified a hypothetical gene, STM2138 (named srcA hereafter), that was co-regulated with genes in SPI-2 and repressed ∼20-fold in an ssrB mutant compared to wild type. This gene was also down regulated in Salmonella mutants lacking the SsrA sensor kinase [20], and was predicted to encode a possible chaperone in a bioinformatics-based screen [23]. The srcA gene is not located in the vicinity of the T3SS encoded by SPI-2 (STM1378-STM1425), but is 713 genes downstream on the chromosome (STM numbers are based on the LT2 genome and ordered sequentially on the chromosome beginning at STM0001, thrL). The predicted srcA gene product was a small protein ∼16 kDa with a pI of 4.6, similar to secretion chaperones associated with T3SS. To verify SsrB input on srcA expression, we analyzed SsrB binding in vivo at the region of DNA surrounding srcA using genome-wide ChIP-on-chip [21] (and unpublished data). This analysis revealed a strong SsrB binding site spanning 10 syntenic probes within the intergenic region (IGR) upstream of srcA, that together with the transcriptional data corroborated a direct regulatory role for SsrB on srcA expression (Fig. 1A). To determine the cellular distribution of SrcA we constructed a srcA-HA allele and expressed this gene in wild type and in ssrB mutant cells under conditions that activate the SPI-2 T3SS [24]. In whole cell lysates, SrcA protein was reduced ∼10-fold in ΔssrB cells compared to wild type (Fig. 1B) and the protein was not detected in the secreted fraction from wild type cells (Fig. 1C), consistent with the expected properties of a T3SS chaperone. As a positive control, SseC, an SsrB-regulated translocon protein of the SPI-2 T3SS was present in the secreted fraction from wild type cells but not from an ssrB mutant.

Identification of an SsrB-regulated gene, <i>srcA</i>.
Fig. 1. Identification of an SsrB-regulated gene, srcA.
(A) Chip-on-chip analysis of the genomic region surrounding srcA including the 5′ upstream region. In vivo binding of SsrB was positive for 10 syntenic probes in the intergenic region (IGR) upstream of srcA. Each data point is a unique probe with averaged data from three biological replicates. Direction of gene transcription is shown by arrows beneath the abscissa and includes the fold-change in mRNA levels in ssrB mutant cells. (B) Accumulation of SrcA protein in cells requires SsrB. Cells harboring an srcA-HA allele were grown under SsrB-activating conditions and whole cell lysates (pellet) were probed by western blot for SrcA-HA, which accumulated in wild type cells (wt) but not in ssrB mutant cells (ΔssrB). (C) SrcA is not secreted into the culture supernatant. Cell-free secreted protein fractions from wt and ΔsrcA cultures were probed for SrcA-HA. SrcA-HA was not found in the secreted protein fraction from any of the cultures, whereas the type III-secreted protein, SseC, was secreted into the medium in an SsrB-dependent manner. (D) SrcA is required for competitive fitness in vivo. The ability of srcA mutant cells to compete with wild type parent cells was quantified by competitive infections of mice. Mice were infected orally with an equal proportion of mutant and wild type cells and the competitive index in the spleen and liver was determined at three days after infection. Complementation of srcA in trans (psrcA) restored the ability of srcA mutants to compete equally with wild type cells. Each data point represents an individual animal.

SrcA contributes to Salmonella fitness in an animal host

Most SsrB-regulated gene products contribute to the intracellular survival of Salmonella in a host. In comparative genomics analyses, srcA was found in all virulent strains of Salmonella enterica containing SPI-2, but was absent from the cold-blooded animal commensal, S. bongori, which lacks SPI-2 (Table S1). This suggested a co-evolution of srcA with the SPI-2 T3SS and a possible functional relationship. If so, we reasoned that SrcA should contribute to animal colonization because the SPI-2 T3SS is essential for host infection. To determine whether SrcA contributes to Salmonella fitness in a host, we created an unmarked in-frame srcA deletion in S. Typhimurium and competed this strain against wild type cells in mixed oral infections of mice [25]. After three days of infection the geometric mean competitive index (CI) for the mutant was 0.20 (95%CI 0.13–0.29) and 0.18 (95%CI 0.06–0.5) in the spleen and liver respectively (P<0.0001; Fig. 1D) indicating that bacteria lacking srcA were significantly out competed by wild type cells during systemic infection. To verify the role of srcA on this phenotype, we complemented the srcA mutant with a wild type srcA gene under the control of its endogenous promoter, which restored in vivo fitness to that of wild type (Fig. 1D). The level of attenuation of the srcA mutant was generally higher than most single effector gene mutants [26], which suggested to us that SrcA contributes to an important aspect of T3SS function in vivo.

Crystal structure of SrcA

Sequence analysis showed 59% amino acid identity between SrcA and CesT, a secretion chaperone in enteropathogenic E. coli (EPEC) (Fig. 2A). As a means to address the biological function of SrcA, we solved the crystal structure at 2.5-Å resolution (PDB 3EPU). A summary of crystallographic data collection and model refinement statistics is in Table 1. The structure was solved by molecular replacement using an initial model based on CesT (PDB 1K3E) [13]. SrcA crystallized in space group C2 with two molecules related by a 2-fold symmetry axis in each asymmetric unit (Fig. 2B). Each monomer consisted of a small and large domain. The smaller domain formed by α1 and the extended loop region preceding β1 adopts a distinct conformation in each subunit. The larger domain mediates dimerization and is comprised of a twisted anti-parallel β-sheet (β1-β2-β3-β5-β4) flanked by α-helices α2 and α3. The dimer interface formed between SrcA monomers occurs primarily through reciprocal hydrophobic interactions between α2 and α2′ with additional interface-stabilizing interactions occurring between the α2 helix of one monomer and β4 and β5 strands of the opposing monomer (Fig. 2B). The total surface area buried at the dimer interface is 1258 Å2, suggesting that SrcA would exist as a dimer in solution, which we confirmed by gel filtration analysis (see below).

Structural characterization of SrcA.
Fig. 2. Structural characterization of SrcA.
(A) Structure-based sequence alignment of full-length SrcA with structural orthologs CesT from enteropathogenic E. coli and SicP from S. Typhimurium. Orange arrowheads denote residues conserved between all three proteins; black arrowheads denote residues that participate in the cargo-binding interface as defined in [12] (PDB 1JY0). Conserved residues are colored as follows: hydrophobic, yellow; negative charge, red; positive charge, blue; threonine, serine, pink; cysteine, light blue; proline, glycine, green. (B) Stereo image of a SrcA dimer with α-helices and β-strands in blue and red respectively.

Tab. 1. Crystallographic Data and Refinement Statistics.
Crystallographic Data and Refinement Statistics.
Data for the highest resolution shell are shown in parentheses.

A structure similarity search with SrcA revealed proteins identified as T3SS secretion chaperones. CesT and SicP were the most structurally similar to SrcA, aligning with RMSD of 1.8 Å and 2.2 Å respectively. With the exception of CesT, SrcA has weak overall sequence identity (<20%) with other T3SS chaperones. CesT, SicP and SrcA contain several clusters of highly conserved amino acids notable on primary sequence alignments (Fig. 2A). Most of these conserved sites are located in the α2-interface helix and in strands β4 and β5 that help stabilize this interface. Although the N-terminus of these proteins is conserved structurally, the tertiary structures differ for each protein. In CesT, α1 and β1 adopt an extended conformation while the equivalent domain in SicP remains closely packed against the dimerization domain [12]. In SrcA, both extended and closely packed conformations are observed in separate subunits of the same dimer within the asymmetric unit. In the extended conformation the N-terminal helix from one dimer interacts with the β4 region of an adjacent dimer, similar to a domain swap seen in CesT [13]. At this time, the possible biological relevance for such a domain swap is unclear and may reflect an artifact of crystallization as critically discussed [13].

A comparison of the SrcA dimer interface with other class I chaperone family members indicates the overall similarity of quaternary structure shared between SrcA, CesT and SicP (Fig. 3A). This is in contrast to the class II chaperone interface of Spa15, which despite having similar tertiary structure to SrcA adopts a distinct dimer interface. A structural alignment of SrcA and Spa15 generated through alignment of single monomers shows the relative difference in subunit orientation between SrcA and Spa15 reflected by the positions of each monomer in the dimer configuration. These unique orientations produce an 80° rotational offset between respective subunits and could be expected to influence the mode of effector interactions utilized by these proteins.

Structural comparison of SrcA, CesT and SicP.
Fig. 3. Structural comparison of SrcA, CesT and SicP.
(A) Crystal structures of SrcA, CesT, and SicP dimers highlighting the dimer interface. The two monomers of each chaperone dimer are colored in light and dark colors (green, SrcA; yellow, CesT; purple, SicP; orange, Spa15). (B) Space-filling model of SrcA bound to the SicP effector, SptP, based on a structural alignment. Negatively charged patches are red, positively charged patches are blue, and hydrophobic patches are white. Black arrows indicate the N-terminus.

To evaluate the potential for an effector-binding surface on SrcA, the structure of SicP in complex with its effector SptP was aligned with SrcA and represented as a space-filling model (Fig. 3B). Binding of SptP occurs primarily in the N-terminus of SicP [12], which is similar to the effector binding surface for SrcA predicted in silico. This surface contains several conserved hydrophobic residues including L16, D24, N26, and I32 (Fig. 2A), which is consistent with SrcA using a similar mechanism for interaction with effectors.

SrcA interacts with the SPI-2 T3SS ATPase

An emerging function for T3SS chaperones is delivery of cargo to the base of the apparatus through interactions with an ATPase. This was shown for the flagellar T3SS [17] and later in the virulence-associated T3SS in E. coli [16],[27] and the SPI-1 T3SS in Salmonella [15]. However, analogous interactions have not been described for the SPI-2 T3SS. Since srcA expression was co-regulated with genes in SPI-2, we hypothesized that it had a functional role in this system. To address this biochemically we purified SrcA and the predicted ATPase for the SPI-2 T3SS, SsaN, and performed binding experiments and gel filtration chromatography of the protein mixtures. SsaN contains conserved amino acid residues characteristic of Walker-A and Walker-B motifs of P-loop nucleoside triphosphate hydrolases, as well as a number of residues shown to contribute to ATP binding or ring stacking with the adenine base of ATP in the E. coli orthologue, EscN, (Q412, E191, R366) (Fig. S1). Since SsaN had not been characterized biochemically we first verified that our purified protein had ATPase activity (Fig. S1). We then mixed SrcA and SsaN proteins and resolved the protein complexes by gel filtration chromatography. By itself, SrcA existed as a dimer in solution (Fig. 4A) with no higher oligomers present, substantiating the stoichiometry obtained from our crystal data. SsaN existed as a monomer with a minor population eluting in a volume consistent with a probable dimer (Fig. 4B). When SrcA was mixed with SsaN, a new protein complex of high molecular weight was observed, along with diminished peaks corresponding to the SrcA dimer and SsaN monomer (Fig. 4C). This new complex elutes with a Stokes radius consistent with an apparent molecular mass of ∼600 kDa. We verified the identities of protein originating from each peak by western blot (Fig. 4D) and LC-MS/MS, which showed the new complex was comprised of both SsaN and SrcA.

SrcA binds to the type III ATPase, SsaN, and induces its multimerization.
Fig. 4. SrcA binds to the type III ATPase, SsaN, and induces its multimerization.
Gel filtration chromatography was used to analyze (A) purified SrcA, (B) purified SsaN, and (C) a mixture of SrcA with SsaN. (D) Peak fractions (black arrows) in the elution volumes were collected and analyzed by western blot with an anti-His antibody to identify protein compositions. Pre-column samples of SrcA migrated as monomer and dimer species in SDS-PAGE gels (verified by LC-MS/MS) while SsaN was prominently a monomer. Incubation of SsaN with SrcA chaperone induced the formation of a high-molecular weight oligomeric species comprised of both proteins, which was only present in SsaN-SrcA mixtures.

SrcA binds effector cargo destined for the SPI-2 T3SS

Since structural and biochemical data unambiguously defined SrcA as a T3SS-associated chaperone, we used two experimental approaches to identify SrcA cargo(s). First, we used stable isotope labeling of amino acids in cell culture (SILAC) [28] in conjunction with quantitative mass spectrometry-based proteomics to identify cargo immunoprecipitated with SrcA from Salmonella. For this series of experiments we constructed a mutant in which the srcA gene was replaced on the chromosome with srcA-FLAG to enable immunoprecipitation from cell lysates. Lysates prepared from wild type cells grown in 2H4-Lys and 13C6-Arg containing SILAC medium (heavy) and srcA mutant cells grown in medium containing natural amino acids of Lys and Arg (light) were mixed and subjected to an immunoprecipitation procedure with an anti-FLAG antibody followed by quantitative mass spectrometry. Peptides originating from wild type cells contained heavy atom-substituted lysine and arginine such that putative SrcA cargo proteins would generate low heavy:light SILAC peptide ratios from the complex mixtures (Fig. 5A). In these experiments the T3SS effector protein SseL was identified by quantitative SILAC mass spectrometry as a specific SrcA cargo protein (Fig. 5B). SseL was immunoprecipitated specifically along with SrcA-FLAG with a SILAC ratio of 0.08, whereas additional abundant proteins displayed SILAC ratios closer to ∼1 (OmpF is shown, Fig. 5B) (mean SILAC ratio of all other peptides identified was 0.93 (Dataset S1).

SrcA is a multi-cargo secretion chaperone for SseL and PipB2.
Fig. 5. SrcA is a multi-cargo secretion chaperone for SseL and PipB2.
(A) SILAC was used in conjunction with quantitative mass spectrometry-based proteomics for systematic identification of effector cargos bound by SrcA in vivo. (B) Mass:charge spectra for representative peptides (sequences shown) identified from SseL and OmpF, where normal isotope abundance-labeled peptides are indicated with open triangles and 2H4-Lys or 13C6-Arg labeled peptides are indicated by filled triangles. Protein abundance of SseL and PipB2 was examined by western blot in wild type and ΔsrcA mutant cells from secreted (C) and cytosolic protein fractions (D). Data is representative of 4 to 6 experiments.

Secondly, to verify the mass spectrometry data and to identify other possible effector cargo, we examined the secretion profiles of wild type cells and an srcA mutant that each expressed HA-tagged effector genes, the products of which are secreted by the SPI-2-encoded T3SS. Using this approach SseL-HA and PipB2-HA were depleted from the secreted protein fraction of srcA mutant cells (Fig. 5C) but reached similar levels in the bacterial cytoplasm (Fig. 5D). As expected from data with the complemented mutant in vivo, expression of srcA in trans restored effector secretion in the srcA mutant (data not shown).

SrcA is required for PipB2-dependent centrifugal displacement of the Salmonella-containing vacuole

To further show a role for SrcA in chaperoning PipB2, we set up experiments to test whether deleting srcA would phenocopy ΔpipB2 cells for PipB2-dependent centrifugal displacement of the Salmonella containing vacuole (SCV) in epithelial cells, an event linked to cell-to-cell transfer during infection in vitro [29]. At 10 h after infection the majority of SCVs were situated near the nucleus in accordance with previous work (Fig. 6A) [29]. By 24 h after infection SCVs containing wild type bacteria were displaced centrifugally towards the cell periphery whereas SCVs containing either pipB2 or srcA mutant bacteria remained juxtaposed to the nucleus (Fig. 6A). The average distance from the nucleus of LAMP1+ SCVs containing wild type bacteria was 2.19 µm at 10h post infection and increased to 7.86 µm by 24 h after infection. Conversely, SCVs containing either ΔpipB2 cells or ΔsrcA cells were 1.38 µm and 2.09 µm at 10h but lacked centrifugal displacement at 24 h (2.23 µm and 2.85 µm, respectively) (Fig. 6B).

SrcA is required for centrifugal movement of the SCV.
Fig. 6. SrcA is required for centrifugal movement of the SCV.
(A) Intracellular positioning of SCVs containing wild type Salmonella or ΔpipB2 and ΔsrcA mutants after 10 and 24 h post-infection. HeLa cells were immunostained for bacteria (red) and LAMP1 (green), and the nucleus stained using DAPI (blue). Arrowheads indicate SCVs. Bar represents 10 µm. (B) HeLa cells were infected with wild type or ΔpipB2 and ΔsrcA mutants of S. Typhimurium. Cells were fixed at the indicated times, immunostained and analyzed as described in Methods. Means with average deviation for two separate experiments are shown.


Structural features of SrcA

We used a reverse genetics approach to define a new secretion chaperone in S. Typhimurium that is integrated functionally with the T3SS encoded by SPI-2, a system well described for its role in immune subversion and intracellular infection during host colonization. Consistent with other class I secretion chaperones, SrcA has extensive electronegative charge distributed over the surface of the molecule. The exact function of this charge distribution is not known, but data from other systems suggests a docking recognition function with other components of the type III apparatus, possibly the T3SS-accociated ATPase. For instance, electronegative surface residues on the SigE chaperone in the SPI-1-encoded T3SS negatively affect cargo secretion, but not cargo stability [30]. In enteropathogenic E. coli, a surface-exposed electronegative residue in the CesT chaperone (Glu142) likewise contributes to Tir secretion but not Tir binding [16], suggesting a role in either targeting bound cargo to the T3SS or in the secretion process itself. Interestingly, SrcA lacks 17-amino acids that make up the carboxyl terminus of CesT, which includes Glu142, and yet it still retains effector binding, ATPase binding and effector secretion functionalities. Thus, it is likely that other surface charged residues of SrcA are involved in these functions or that SrcA targets effector cargo to the secretion apparatus through a mechanism distinct from CesT.

The interface for the SrcA homodimer is extensive and is more in keeping with the structural features of single-effector class IA chaperones (∼1100–1300 Å2) compared to the reduced dimer interface of Spa15, a multi-cargo class IB chaperone from Shigella [31]. Similar to CesT and SicP, the dimer interface of SrcA adopts a parallel configuration when comparing α2 helices of opposing subunits. In contrast, the subunits of Spa15 undergo a significant relative rotation (80°) about the α2-axis resulting in a different interface. These features may relate to biological function in the SPI2 T3SS and/or in vetting effector cargo amongst the >30 effectors identified in Salmonella. We found no evidence of interactions between SrcA and translocon components of the SPI-2 T3SS and so it appears as though SrcA functions specifically in effector translocation events.

Implications for type III secretion function

The interaction between SrcA and SsaN supports an emerging paradigm whereby secretion chaperones bring effector cargo to the T3SS through physical interaction with the hexameric ATPase at the base of the apparatus [14]. This was demonstrated for chaperone-ATPase components in the flagellar type III system [17] and in non-flagellar type III systems in E. coli [27] and the SPI-1 system in Salmonella [15]. Our work shows the first chaperone-ATPase interaction for a T3SS functioning from within an intracellular vacuolar compartment and supports this interaction as a more generalize feature of type III secretion function. In our experiments, we could induce the ATPase domain of SsaN to oligomerize in the presence of SrcA, but not in its absence, which was intriguing because the purified enzyme lacked a domain at the carboxyl terminus thought to be involved in oligomer stability, at least for E. coli EscN [14]. These data suggest that type III chaperones might have an as yet undefined role in assembly of the ATPase homohexamer that gives rise to efficient effector translocation. This will be an important area for further experimentation in this and other systems.

Genetic and functional integration of SrcA with type III secretion

The genes encoding the srcA chaperone and the effector cargos (pipB2 and sseL) are found in all serotypes of Salmonella enterica that contain the SPI-2-encoded T3SS. Conversely, these genes are absent from S. bongori, which lacks the SPI-2-encoded T3SS. The expression of srcA is coordinated with T3SS transcriptional activity via the SsrA-SsrB two-component regulatory system encoded in SPI-2. The direct binding of SsrB to the promoter region upstream of srcA, along with SsrB-regulation of both sseL [19],[20] and pipB2 [32] is indicative of multiple cis-regulatory mutation events that have allowed for functional coordination of the distributed secretion apparatus, chaperone and effector cargos. We recently described this type of regulatory evolution for pathogenic adaptation of Salmonella to its host [21] and srcA is consistent with regulatory evolution of chaperone-effector gene pairs that are not co-transcribed in operons.

Due to low G+C base content compared to the genome average of 52%, it's likely that srcA (32% G+C) and an adjacent gene, STM2137 (37% G+C), were acquired as a foreign islet that was retained in organisms containing the SPI-2 T3SS due to the selective advantage afforded by the new protein interactions so created. Interestingly, STM2137 (also known as SseK2) is a likely paralog of SseK1, an effector translocated by the SPI-2 T3SS [33]. SseK2 is also regulated by the SsrA-SsrB two-component system but compared to SseK1, it is translocated in much less abundance into host cells [33]. Using the methods described here, we were not able to detect SseK2 secretion or a physical interaction with SrcA, however it remains possible that SrcA also chaperones SseK2 for low-level translocation.

SrcA is unique among other multi-effector chaperones most closely related to it in that it is unlinked from the T3SS genomic island. For example, InvB and SicP (Salmonella SPI-1), CesT (enteropathogenic E. coli locus of enterocyte effacement) and Spa15 (Shigella mxi/spa virulence plasmid region) chaperones are all encoded within the T3SS structural operons, implying they have co-evolved as a single genetic entity from a common ancestor. Given its genetic neighborhood, srcA appears to be a genetic acquisition separate from SPI-2 that functionally links some effectors to the T3SS apparatus via the ATPase. The role of horizontal gene transfer and regulatory evolution in allowing for uncoupling of chaperones, effectors and the T3SS has many possible implications for T3SS function, including plasticity in chaperone-effector interaction networks, expansion of effector repertoires, and alterations to the kinetics and hierarchical delivery of effectors to a host cell. These events may improve host adaptability or even expand the host range of bacteria that acquire and integrate new functional secretion chaperones.


Ethics statement

All experiments with animals were conducted according to guidelines set by the Canadian Council on Animal Care. The local animal ethics committee, the Animal Review Ethics Board at McMaster University, approved all protocols developed for this work.

Bacterial strains and growth conditions

Salmonella enterica serovar Typhimurium strain SL1344 was used as the wild type strain and all mutants were isogenic derivatives. Chromosomal replacements were done using a λ-Red-based technique described previously [34]. A synthetic minimal medium for isotopic labeling of proteins in cell culture was developed for SILAC proteomics experiments based on LPM medium that activates the SsrA-SsrB two-component regulatory system for induction of SsrB-regulated genes [24]. LPM medium was modified for compatibility with quantitative SILAC mass spectrometry by replacing casamino acids with individual l-amino acids and containing either natural l-arginine and l-lysine, or 13C-subsituted arginine (13C6-Arg) and deuterium-substituted lysine (2H4,4,5,5-Lys) (Cambridge Isotope Laboratories, Andover, MA). A full description of LPM-SILAC medium is provided in Protocol S1.

Protein production and purification

For purification of His-tagged SrcA, the srcA gene was amplified from S. Typhimurium chromosomal DNA and cloned into pET-3(a) (Novagen) as a C-terminal fusion to a 6-histidine tag. Expression plasmids were transformed into E. coli Rosetta (DE3) and cells were grown in 1-L LB broth and induced with IPTG at OD600nm 0.6 for 3 h at 37°C. Harvested cells were resuspended in 25 ml NiA buffer (20 mM Tris pH 8.5, 500 mM KCl, 20 mM imidazole, 0.03% LDAO and 10% glycerol), lysed using a French press and centrifuged at 48,383 g for 40 min. Soluble His-tagged protein was purified using nickel-chelating resin (GE Healthcare Life Sciences), followed by Mono-Q anion exchange using a 20 mM Tris pH 7.5, 500 mM KCl, 10% glycerol. Purified protein was exchanged into a final buffer of 20 mM Tris pH 7.5, 100 mM KCl, 10% glycerol and concentrated to ∼5 mg/mL. All SrcA purification steps were carried out at room temperature. For purification of His-tagged SsaN, a soluble protein form containing the ATPase domain and C-terminal domain spanning residues Q90-E433 was constructed according to previous work done on E. coli EscN [14]). SsaNΔ89 was purified from E. coli Rosetta (DE3) cells containing a pET-3(a) plasmid with the ssaNΔ89 gene. Cells were sub-cultured into 1-L of Terrific Broth (TB) and grown with shaking at 200 rpm at 20°C for 65 h for auto-induction. Cells were harvested and lysed using a French press and soluble protein was purified using nickel chromatography and ion-exchange chromatography as described above. Finally, SsaN protein was concentrated to ∼9 mg/ml. All purification steps for SsaN were carried out at 4°C.

Crystallization, data collection and structure determination

Crystals were generated via the hanging drop method by vapor diffusion using purified protein combined with crystallization solution (100 mM Bis-Tris propane pH 7.0, 200 mM MgCl2, 35% PEG 3350, 3.95 mM FOS-choline-9, 5% Jeffamine M-600) at a 3.5∶1 ratio, and equilibrated over 500 µL of 1.7 M ammonium sulfate, at 298K. After initial crystals were formed, drops were moved over wells containing 500 µL of 3 M ammonium sulfate and further equilibrated for 2 to 3 weeks. A single native data set, collected to 2.5 Å at the National Synchrotron Light Source Beamline X12C (Brookhaven, NY) was processed using HKL2000. An initial structural solution was achieved using molecular replacement with the type III chaperone CesT (PDB ID 1K3E) as the starting search model. PHENIX was used for model building [35]. Further model building and refinement was conducted iteratively using COOT and REFMAC [36],[37]. The final structure had R and Rfree values of 21.4 and 25.3 respectively.

Competitive infection of mice

For competitive infections, female C57BL/6 mice (Charles River) were infected per os with a 1∶1 mixed inoculum containing srcA mutant cells and a marked wild type strain resistant to chloramphenicol as described previously [21]. Competitive index (CI) was calculated in the liver and spleen at 3 days after infection as: cfu (mutant/wild type) output/(mutant/wild type) input. For complementation experiments, srcA was cloned with its native promoter into the low-copy plasmid pWSK29 and transformed into ΔsrcA cells. The complemented mutant was competed in CI experiments against wild type cells transformed with empty pWSK29.

Co-immunoprecipitation experiments and quantitative SILAC mass spectrometry

Co-immunoprecipitations were performed with M2-Agarose beads conjugated with anti-FLAG antibody (F-gel, Sigma, Oakville, ON). Wild type bacteria and bacteria with a srcA-FLAG allelic replacement were grown overnight in LB broth, washed in SILAC-LPM (Protocol S1), and sub-cultured 1∶50 into SILAC-LPM containing either 12C6-Arg and H4-Lys (light) or 13C6-Arg and 2H4-Lys (heavy) amino acids. Isotopic labeling of proteins was carried out until the culture reached an optical density of 0.6 at 600 nm. Cells were washed with PBS, pelleted at 3000 g for 10 minutes and resuspended in PBS containing mini-EDTA tablet (1 per 10 ml) protease inhibitors (PBS-PI) (Roche, Mississauga, ON). Cells were sonicated six times for 30 seconds each with 1 min intervals on ice (Misonix Sonicator 3000, Misonix, Farmingdale, NY). Samples were centrifuged at 3000 g for 15 minutes and the resulting supernatants from heavy and light samples were mixed. F-gel was equilibrated with PBS-PI containing 10 µg/ml BSA for 60 minutes and then lysates were immunoprecipitated with F-gel for 16 h at 4°C. F-gel was washed with PBS-PI ten times for 30 min each wash. Bound proteins were eluted with either FLAG peptide or twice with SDS-sample buffer (1 M Tris pH 8.0, 20% SDS, 0.5 M EDTA pH 8, 10% glycerol, 200 mM dithiothreitol). Final protein preparations were filter-concentrated, washed with water and diluted to a final concentration of 50 mM ammonium bicarbonate and 1% sodium deoxycholate. Proteins were digested in solution and analyzed by liquid chromatography-tandem mass spectrometry exactly as described previously [38].

Gel filtration chromatography

Two hundred microlitres of purified SrcA protein in gel filtration buffer (20 mM Tris pH 7.5, 200 mM KCl; protein concentration, 1.1 mg/ml) was injected into a Superdex S200 10/300GL gel filtration column (Amersham Biosciences, Piscataway, NJ) at 0.2 ml/min. Elution fractions (0.5 ml) were collected at a flow rate of 0.5 ml/min. For SsaN, 40 µl (8.84 mg/ml) was diluted with 320 µl gel filtration buffer and injected into an S200 column as described. For mixing experiments, 320 µl of SrcA (0.1mg/ml) was mixed with 40.8 µl SsaN (8.84 mg/ml) at room temperature for 2 h. The mixture was centrifuged at 10,000 g for 5 minutes and the top two hundred microlitres of the supernatant was injected into an S200 column. Peak fractions were collected and protein identities in all peaks were verified by Western blot and LC-MS/MS.

Type III secretion assays

Experiments to monitor secretion of type III effectors were performed according to previously published methods [19]. Wild type cells and an srcA mutant used for these experiments were transformed with low-copy plasmids expressing HA-tagged effector genes from their endogenous promoters (sifA, sopD2, gogB, pipB, sseK2) or contained allelic replacements on the chromosome to express HA-fusion proteins (pipB2, sseL). Antibodies used for Western blots were: mouse anti-HA (1∶1000), mouse anti-DnaK (1∶5000), rabbit anti-SseC (1∶20000). Secondary antibodies conjugated to horseradish peroxidase (HRP) were used at 1∶5000 and antigen-antibody complexes were detected using enhanced chemiluminescence (ECL).

ATPase assay

ATPase activity of SsaN was measured using the pyruvate kinase-lactate dehydrogenase coupled assay that monitors NADH oxidation coupled with ATP hydrolysis [39]. Data was plotted as a decrease in absorbance at 340 nm over time.

SCV positioning experiments

The intracellular position of Salmonella-containing vacuoles was determined by measuring the distance of LAMP1+ SCVs to the nearest edge of the host cell nucleus (labeled by DAPI staining) in fixed HeLa cells as previously reported [29]. Measurements were made using Openlab 3.1.7 software. Experiments were done in duplicate and the resulting finalized average was calculated from two independent average values (at least 100 measurements per experiment). Average distances with average deviation are reported.


The coordinates and structure factors of SrcA have been deposited in the Protein Data Bank (accession code 3EPU).

Supporting Information

Attachment 1

Attachment 2

Attachment 3

Attachment 4


1. CornelisGR

2006 The type III secretion injectisome. Nat Rev Microbiol 4 811 825

2. GalanJE


2006 Protein delivery into eukaryotic cells by type III secretion machines. Nature 444 567 573

3. ParsotC



2003 The various and varying roles of specific chaperones in type III secretion systems. Curr Opin Microbiol 6 7 14

4. StebbinsCE


2003 Priming virulence factors for delivery into the host. Nat Rev Mol Cell Biol 4 738 743

5. YipCK



2005 Structural characterization of a type III secretion system filament protein in complex with its chaperone. Nat Struct Mol Biol 12 75 81

6. SheaJE




1996 Identification of a virulence locus encoding a second type III secretion system in Salmonella typhimurium. Proc Natl Acad Sci U S A 93 2593 2597

7. OchmanH




1996 Identification of a pathogenicity island required for Salmonella survival in host cells. Proc Natl Acad Sci USA 93 7800 7804

8. ZurawskiDV


2003 SseA acts as the chaperone for the SseB component of the Salmonella Pathogenicity Island 2 translocon. Mol Microbiol 47 1341 1351

9. Ruiz-AlbertJ





2003 SseA is a chaperone for the SseB and SseD translocon components of the Salmonella pathogenicity-island-2-encoded type III secretion system. Microbiology 149 1103 1111

10. CoombesBK





2003 SseA is required for translocation of Salmonella pathogenicity island-2 effectors into host cells. Microbes Infect 5 561 570

11. LilicM



2006 A common structural motif in the binding of virulence factors to bacterial secretion chaperones. Mol Cell 21 653 664

12. StebbinsCE


2001 Maintenance of an unfolded polypeptide by a cognate chaperone in bacterial type III secretion. Nature 414 77 81

13. LuoY





2001 Structural and biochemical characterization of the type III secretion chaperones CesT and SigE. Nat Struct Biol 8 1031 1036

14. ZarivachR





2007 Structural analysis of a prototypical ATPase from the type III secretion system. Nat Struct Mol Biol 14 131 137

15. AkedaY


2005 Chaperone release and unfolding of substrates in type III secretion. Nature 437 911 915

16. ThomasNA





2005 CesT is a multi-effector chaperone and recruitment factor required for the efficient type III secretion of both LEE- and non-LEE-encoded effectors of enteropathogenic Escherichia coli. Mol Microbiol 57 1762 1779

17. ThomasJ



2004 Docking of cytosolic chaperone-substrate complexes at the membrane ATPase during flagellar type III protein export. Proc Natl Acad Sci U S A

18. FassE


2009 Control of Salmonella pathogenicity island-2 gene expression. Curr Opin Microbiol 12 199 204

19. CoombesBK





2007 SseL is a Salmonella-specific translocated effector integrated into the SsrB-controlled salmonella pathogenicity island 2 type III secretion system. Infect Immun 75 574 580

20. RytkonenA





2007 SseL, a Salmonella deubiquitinase required for macrophage killing and virulence. Proc Natl Acad Sci U S A 104 3502 3507

21. OsborneSE





2009 Pathogenic adaptation of intracellular bacteria by rewiring a cis-regulatory input function. Proc Natl Acad Sci U S A 106 3982 3987

22. CoombesBK





2005 Negative regulation of Salmonella pathogenicity island 2 is required for contextual control of virulence during typhoid. Proc Natl Acad Sci U S A 102 17460 17465

23. PaninaEM





2005 A genome-wide screen identifies a Bordetella type III secretion effector and candidate effectors in other species. Mol Microbiol 58 267 279

24. CoombesBK





2004 Expression and secretion of Salmonella pathogenicity island-2 virulence genes in response to acidification exhibit differential requirements of a functional type III secretion apparatus and SsaL. J Biol Chem 279 49804 49815

25. BeuzonCR


2001 Use of mixed infections with Salmonella strains to study virulence genes and their interactions in vivo. Microbes Infect 3 1345 1352

26. Ruiz-AlbertJ





2002 Complementary activities of SseJ and SifA regulate dynamics of the Salmonella typhimurium vacuolar membrane. Mol Microbiol 44 645 661

27. GauthierA


2003 Translocated intimin receptor and its chaperone interact with ATPase of the type III secretion apparatus of enteropathogenic Escherichia coli. J Bacteriol 185 6747 6755

28. OngSE



2003 Mass spectrometric-based approaches in quantitative proteomics. Methods 29 124 130

29. SzetoJ





2009 Salmonella-containing vacuoles display centrifugal movement associated with cell-to-cell transfer in epithelial cells. Infect Immun 77 996 1007

30. KnodlerLA





2006 Structure-based mutagenesis of SigE verifies the importance of hydrophobic and electrostatic residues in type III chaperone function. Mol Microbiol 62 928 940

31. van EerdeA





2004 Structure of Spa15, a type III secretion chaperone from Shigella flexneri with broad specificity. EMBO Rep 5 477 483

32. KnodlerLA





2003 Salmonella type III effectors PipB and PipB2 are targeted to detergent-resistant microdomains on internal host cell membranes. Mol Microbiol 49 685 704

33. Kujat ChoySL





2004 SseK1 and SseK2 are novel translocated proteins of Salmonella enterica serovar typhimurium. Infect Immun 72 5115 5125

34. UzzauS




2001 Epitope tagging of chromosomal genes in Salmonella. Proc Natl Acad Sci U S A 98 15264 15269

35. AdamsPD





2002 PHENIX: building new software for automated crystallographic structure determination. Acta Crystallogr D Biol Crystallogr 58 1948 1954

36. EmsleyP


2004 Coot: model-building tools for molecular graphics. Acta Crystallogr D Biol Crystallogr 60 2126 2132

37. MurshudovGN



1997 Refinement of macromolecular structures by the maximum-likelihood method. Acta Crystallogr D Biol Crystallogr 53 240 255

38. ChanQW



2006 Quantitative comparison of caste differences in honeybee hemolymph. Mol Cell Proteomics 5 2252 2262

39. PonNG


1967 A direct spectrophotometric assay for pyruvate kinase. Anal Biochem 19 272 279

Hygiena a epidemiologie Infekční lékařství Laboratoř

Článek vyšel v časopise

PLOS Pathogens

2010 Číslo 2

Nejčtenější v tomto čísle

Tomuto tématu se dále věnují…


Zvyšte si kvalifikaci online z pohodlí domova

Antiseptika a prevence ve stomatologii
nový kurz
Autoři: MUDr. Ladislav Korábek, CSc., MBA

Citikolin v neuroprotekci a neuroregeneraci: od výzkumu do klinické praxe nejen očních lékařů
Autoři: MUDr. Petr Výborný, CSc., FEBO

Zánětlivá bolest zad a axiální spondylartritida – Diagnostika a referenční strategie
Autoři: MUDr. Monika Gregová, Ph.D., MUDr. Kristýna Bubová

Diagnostika a léčba deprese pro ambulantní praxi
Autoři: MUDr. Jan Hubeňák, Ph.D

Význam nemocničního alert systému v době SARS-CoV-2
Autoři: doc. MUDr. Helena Lahoda Brodská, Ph.D., prim. MUDr. Václava Adámková

Všechny kurzy
Kurzy Doporučená témata Časopisy
Zapomenuté heslo

Nemáte účet?  Registrujte se

Zapomenuté heslo

Zadejte e-mailovou adresu, se kterou jste vytvářel(a) účet, budou Vám na ni zaslány informace k nastavení nového hesla.


Nemáte účet?  Registrujte se