# Robust Demographic Inference from Genomic and SNP Data

We introduce a flexible and robust simulation-based framework to infer demographic parameters from the site frequency spectrum (SFS) computed on large genomic datasets. We show that our composite-likelihood approach allows one to study evolutionary models of arbitrary complexity, which cannot be tackled by other current likelihood-based methods. For simple scenarios, our approach compares favorably in terms of accuracy and speed with , the current reference in the field, while showing better convergence properties for complex models. We first apply our methodology to non-coding genomic SNP data from four human populations. To infer their demographic history, we compare neutral evolutionary models of increasing complexity, including unsampled populations. We further show the versatility of our framework by extending it to the inference of demographic parameters from SNP chips with known ascertainment, such as that recently released by Affymetrix to study human origins. Whereas previous ways of handling ascertained SNPs were either restricted to a single population or only allowed the inference of divergence time between a pair of populations, our framework can correctly infer parameters of more complex models including the divergence of several populations, bottlenecks and migration. We apply this approach to the reconstruction of African demography using two distinct ascertained human SNP panels studied under two evolutionary models. The two SNP panels lead to globally very similar estimates and confidence intervals, and suggest an ancient divergence (>110 Ky) between Yoruba and San populations. Our methodology appears well suited to the study of complex scenarios from large genomic data sets.

Published in the journal:
. PLoS Genet 9(10): e32767. doi:10.1371/journal.pgen.1003905

Category:
Research Article

doi: 10.1371/journal.pgen.1003905

## Summary

We introduce a flexible and robust simulation-based framework to infer demographic parameters from the site frequency spectrum (SFS) computed on large genomic datasets. We show that our composite-likelihood approach allows one to study evolutionary models of arbitrary complexity, which cannot be tackled by other current likelihood-based methods. For simple scenarios, our approach compares favorably in terms of accuracy and speed with , the current reference in the field, while showing better convergence properties for complex models. We first apply our methodology to non-coding genomic SNP data from four human populations. To infer their demographic history, we compare neutral evolutionary models of increasing complexity, including unsampled populations. We further show the versatility of our framework by extending it to the inference of demographic parameters from SNP chips with known ascertainment, such as that recently released by Affymetrix to study human origins. Whereas previous ways of handling ascertained SNPs were either restricted to a single population or only allowed the inference of divergence time between a pair of populations, our framework can correctly infer parameters of more complex models including the divergence of several populations, bottlenecks and migration. We apply this approach to the reconstruction of African demography using two distinct ascertained human SNP panels studied under two evolutionary models. The two SNP panels lead to globally very similar estimates and confidence intervals, and suggest an ancient divergence (>110 Ky) between Yoruba and San populations. Our methodology appears well suited to the study of complex scenarios from large genomic data sets.

## Introduction

Reconstructing the past history of a given species is important not only for its own sake, but for disentangling demographic from selective effects *[1]*, *[2]*. Demography is indeed often estimated on a set of markers and the best neutral model is used as a null for evidencing markers under selection *[3]*, *[4]* or for finding global patterns of selection across the genome *[e.g. 5]*. Various methods have been proposed to estimate demography from genetic data, including full-likelihood methods *[6]*–*[9]*, summary-statistics likelihood based methods *[10]*, *[11]*, or different flavours of Approximate Bayesian Computation *[12]*–*[16]*. With some exceptions, these methods are relatively slow and do not scale up very well with new genomic data, as computation time increases with the number of loci. In contrast, recently developed composite-likelihood methods based on the site frequency spectrum *[SFS, 17]* have computing times that do not depend on the amount of available genomic data *[18]*–*[21]*, and several approaches have been proposed to estimate demographic parameters from the SFS *[e.g. 11]*, *[17]*, *[20]*, *[21]*–*[24]*. Among these latter methods, the most widely used is *[21]*, which estimates the expected joint site frequency spectrum for an arbitrary set of parameters by a diffusion approach. Whereas the estimation of the expected SFS is relatively fast, the optimization of the parameters is still time-consuming, which prevents to tackle models with more than three populations at the same time. While some methods can extract demographic information from single whole-genomes per population *[25]*, *[26]*, SFS-based methods, when applied to multiple individuals, do not require whole genome data because correct estimates of the SFS can be obtained from a few Mb *[21]*. However, with few exceptions *[11]*, the accuracy of SFS-based methods has not been properly assessed, and their ability to infer demographic parameters has been questioned *[27]*.

One advantage of SFS-based inference methods is that they can handle large next generation sequencing (NGS) data sets *[28]*–*[30]*. However, the computation of the SFS from NGS data is not always trivial. An empirical Bayes approach has been proposed to estimate the joint 2D SFS from low coverage data *[31]* and an unbiased maximum likelihood approach has been developed to recover the SFS for a single population *[32]*. SFS obtained from low-coverage genomic data often show a deficit of rare alleles because a given allele needs to be observed in several individuals to exclude read errors *[28]*, *[33]*. These missing low frequency variants can lead to imprecisions and biases in population genetic inferences *[34]*. Several approaches have been proposed to correct for this bias *[32]*, *[35]*, either during the process of genotype calling itself *[e.g. 31]*, *[36]*, *[37]* or later by applying quality filters on called genotypes *[e.g. 38]*. Gravel et al. *[28]* have also proposed to predict the SFS from low-coverage data by using an overlapping subset of high quality data to derive a generalized correction of the SFS. It appears likely that SFS estimation will improve with higher coverage NGS data, and that such data will become increasingly available and used in the near future.

As an alternative to deep sequencing, one could use information from a few tens of thousands SNP scattered over the whole genome to make demographic inference, but most SNP chips have complex and often unknown ascertainment schemes that bias the SFS if not properly taken into account *[39]*–*[41]*. However, a new SNP chip has recently been introduced *[42]*, *[43]*, which implements a known and simple ascertainment scheme where SNPs are selected at random from sites that are heterozygous in a single individual of a given population. Whereas this ascertainment scheme has no major effect on statistics designed to infer admixture *[42]*, it biases the site frequency spectrum *[44]*, *[45]* and thus potentially alters the estimation of other parameters. Using simple combinatorics, the SFS can be unbiased *[44]* in a single population, and this strategy could be extended to unbias joint SFS under complex models involving more populations. A diffusion approach has been recently proposed to estimate divergence times between two populations based on the fraction of SNPs having occurred recently in the ascertained population *[45]*, but this approach is currently restricted to the sole estimation of divergence time and cannot be applied if gene flow occurred between populations.

In this paper, we introduce a flexible and robust way to estimate demographic parameters from the SFS inferred from sequence or SNP chip data that we implemented in the *fastsimcoal2* software. Our method is based on Nielsen's approach *[17]*, which estimates the expected SFS from simulations under any demographic model. We compare the performance of this approach to *[21]* under a variety of evolutionary models with simulated data, and we show that it can successfully handle models including more than three populations. We also show how this approach can be extended to deal with ascertained SNP panels by explicitly modelling the ascertainment bias and computing likelihoods based on expected ascertained SFSs. We first apply our method to a large human genomic data set from which we estimate the demography of four populations, and then to two separate Affymetrix ascertained SNP panels *[43]* from which we estimate the demography of two African populations.

## Results

## Comparison between *fastsimcoal2* and

We performed parameter estimations for 10 data sets generated under each of the 3 evolutionary scenarios shown in *Figures 1A–1C*. We took two approaches for estimating demography: our new approach based on a composite multinomial likelihood where the expected SFS is obtained using coalescent simulations and *[21]*, which computes a composite Poisson likelihood where the expected SFS is obtained by a diffusion approximation. The two approaches have a very similar accuracy under a simple bottleneck scenario (*Figure S4*) and under a scenario of population isolation with migration *[46]* (IM model, *Figure S5*). For both approaches we report the estimates leading to the maximum likelihood obtained among 50 independent runs. Under these conditions, leads to extremely accurate estimations for most data sets. However, in a few cases (1/10 for the bottleneck scenario, and 2/10 for the IM model), the best likelihood obtained from 50 runs led to very divergent estimates, which were not reported in *Figures S4*, *S5*. For those cases, the log likelihood appeared orders of magnitude smaller than those inferred for other data sets and could be easily spotted. Although it is possible to recognize that additional runs are necessary to get meaningful estimates, we did not follow this procedure here, as we wanted to allocate similar resources to the two programs and get results using an automated procedure not requiring further user tweaks. Contrastingly, *fastsimcoal2* estimations seem to converge to correct values for all data sets in *Figure S4* and *S5*, even though the variances of the estimators are slightly larger than 's for those cases where both approaches agree on the correct demographic model.

Parameter estimations under the more complex scenario of *Figure 1C*, mimicking a simple model of human evolution, are reported in *Figure 2*. In this case, results obtained by *fastsimcoal2* are again very accurate and close to the true values for all 10 data sets. With , we report results for only 8 data sets due to potential lack of convergence, as explained above. However, even for these 8 data sets, the best estimates can be quite far from the true parameters, especially for parameters related to the ancestral bottleneck. It suggests that for complex scenarios involving three populations and more than 5 parameters, needs to be run from many more than 50 initial conditions and that some iterative refinements of search ranges might be necessary to obtain correct solutions (R. Gutenkunst, personal communication). Note that a lack of robustness of under certain conditions (e.g. high migration rates between populations) had already been reported before *[11]*, *[24]*.

## Estimation of parameters under a scenario with more than 3 populations

We have estimated parameters for the more complex hierarchical continent-island model shown in *Figure 1D*, involving samples from 10 different populations (islands), a model that cannot handle. Continent-island models are equivalent to infinite islands models, and have been used to model recent spatial expansions *[see e.g. 47]*. This model could therefore represent two successive spatial expansions, the first one stemming from an ancestral refuge area, and the second one starting more recently from a single deme belonging to the first expansion wave. The parameters of interest are here the immigrations rates in each sampled deme, the timing of the spatial expansions and the ancestral population size. As shown in *Figure 3*, all these parameters are extremely well estimated by *fastsimcoal2* when we maximize the multiple pairwise composite-likelihood shown in *eq. (7)*. We note that we can also recover very well the immigration rate to the unsampled deme (rightmost column in *Fig. 3*) from which the second expansion started. The accuracy of the immigration rate estimations is quite remarkable, given that they span over two orders of magnitude and that we specified the same search intervals covering four orders of magnitude for each parameter.

## Estimation of human demography from non-coding genomic data

We first applied our methodology to the problem of estimating the past demography of two African, one European and one African-American populations. The multidimensional SFS for these 4 populations was estimated from more than 220,000 non-coding SNPs, each located more than 5 Kb away from its closest neighbour, such as to minimize linkage disequilibrium between SNPs. We examined three evolutionary scenarios shown in *Figure 4* to explain observed patterns of diversity. In the first and simplest scenario (*Figure 4A*), the South Western African American population (ASW) was assumed to have been formed 16 generations ago (around 1600 AD) with initial input from one European (CEU) and two Niger-Congo speaking African populations (Yoruba from Nigeria: YRI; Luhya from Kenya: LWK) having diverged earlier. In order to calibrate the other parameters, we assumed that the European population diverged from the ancestral African population 50 Ky ago *[28]*, *[48]*. Under this scenario, we find that the ASW population would have initially received 16% (CI95% = [15–17%]) of its gene pool from the CEU population, 83.8% from the YRI population and almost nothing (0.2%) from the LWK population (see *Table 1*, Model A). This European contribution is in line with previous estimates obtained from SNP-chip allele frequencies (17% for Southwest African Americans *[49]*). Under model A, the two Niger-Congo populations would have diverged very recently (70 generations ago, CI95% = [56–197]), and the CEU and YRI populations have the smallest effective population sizes (around 4000 individuals), whereas the ASW population has the largest (N_{ASW} = 170,000 individuals). The inferred human ancestral population size is relatively small (about 8000 individuals) and there is no real signal of an ancestral bottleneck since the estimated bottleneck size (N_{BOT} = 7083) is only 12% smaller than the ancestral size, in line with recent results showing no evidence for a strong Pleistocene bottleneck in humans *[50]*.

Whereas model A captures some obvious features of the past demography of these populations (see *Table S1*), it seems relatively unrealistic for some other features (i.e. a direct contribution of the CEU and YRI populations to ASW). We therefore investigated a more realistic but more complex and parameter-rich model involving several other unsampled populations, as shown in *Figure 4B* (see Material and Methods for a complete description of this model). The multiple continent-island model B1 assumes that the ASW population was founded by migrants originating from a Niger-Congo and from a European metapopulations, from which the two Niger-Congo and the CEU populations currently receive migrants. It also assumes that the Niger-Congo and the European metapopulations passed through a bottleneck when they diverged from an ancestral African population. An even more complex scenario B2 includes a potential admixture of the Luhya population (a Niger-Congo speaking population from Kenya) with an unsampled (potentially East-African) population, which also diverged earlier ago from the ancestral African population.

The model parameters estimates and their confidence intervals obtained by a parametric bootstrap approach are listed in *Table 1*. The two models show overall very congruent values and overlapping 95% confidence intervals for their common parameters. The agreement is especially good for the human ancestral size (N_{ANC} = 12–13,000 individuals), the ancestral African population size (N_{AFR} = 25–27,000), the continental European size (N_{EUR} = 14,500–16,500 individuals), the European strong bottleneck intensity (I_{BEUR} = = 0.42–0.43, where is the bottleneck duration, and is the bottleneck size), the Niger-Congo milder bottleneck intensity (I_{NC} = 0.027–0.028), the divergence time of the Niger-Congo metapopulation (T_{NC} = 793–797 generations), the time to the shift to the ancestral human population size (T_{BOT}∼10,000 generations), and the European contribution to the ASW population (a_{E} = 0.16–0.17). The other parameters show different point estimates but all have overlapping confidence intervals.

We have plotted the marginal SFS for each of the four populations in *Figure S6*, to visualize the fit of the expected and observed SFS for each model. Whereas the expected population specific marginal SFSs show some discrepancies with the observation for the four populations under model A, the fit is much better for model B1, except for LWK, which still shows an underestimation of singletons and doubletons. Model B2, which allows for LWK admixture, leads to a much better fit for the LWK population, as shown by the cumulative distribution of differences between the expected and observed marginal SFS (see 3^{rd} row in *Figure S6*). Under this model B2, we estimate the LWK population to have 17% admixture from an unspecified but probably East African (see e.g. *Figure 1* in ref. *[51]*) population. This East African population would have diverged from the ancestral African population more than 2200 generations ago (95% CI 1274–3586), thus potentially before the out-of-Africa dispersal. Even though the different models can be conveniently compared on the basis of their marginal SFSs, these 1D SFSs only capture a small fraction of the total (multidimensional) SFS. Therefore the models are better compared on the basis of their likelihood. This is formalized here by a model comparison procedure based on AIC *[52]*, revealing that the relative likelihood of models A and B1 are almost 0 as compared to that of model B2 (see *Table S2*).

## Estimation of African demography from ascertained SNP panels

We estimated the parameters of African past demographies shown in *Figure 5* based on Yoruba and San samples for which we have independent SNP panels (see *Methods* section). In model A (shown in *Figure 5A*), we assumed that the Yoruba and San samples were taken from large populations that expanded after their divergence, and we allowed for a single pulse of gene flow between them at a given time *T _{a}* in the past. The model B (shown in

*Figure 5B*) includes the divergence of two-continent island metapopulations, and assume that the sampled populations are each an island attached to these continents and that the two continents exchanged migrants some time ago in a single pulse of gene flow, like in model A, but also earlier in time (see

*Figure 5B*and material and methods for a complete description of the model).

The point estimates of the two models and their associated 95% confidence intervals (CI) inferred from 100 parametric bootstraps are reported in *Table 2* for both SNP panels. Overall, the two SNP panels show congruent point estimators and CI widths under the two models. There is only one parameter (N_{AY}) for which the CI do not overlap under model A, which suggests that the two panels provide broadly compatible scenarios of African demography. Estimations from data simulated under the same model for parameter values similar to those inferred in *Figure 5A* show (see *Figure S8*) that i) both panels should perform very similarly for estimating parameters, ii) all parameters of the model should be well estimated, except those related to a very recent expansion of one of the ascertained population, iii) ancestral population sizes and divergence times are particularly well estimated, and iv) the addition of a single Denisovan sequence allows one to recover the absolute values of the parameters.

Concentrating on the parameters common to both models, we see in *Table 2* that the ancestral size N_{ANC} shows very similar estimates across models and panels, with an estimated value around 9,000–9,500 individuals (in line with estimates obtained with non-ascertained data set). The African population size is also consistently estimated to be around 18,000–28,000 individuals across models, and the ancestral Yoruban size appears smaller and between 5,500 and 13,000 individuals. These estimates fit well with previous Bayesian estimations of African demography from nuclear markers under slightly different models. Based on microsatellites, Wegmann et al. *[13]* estimated the ancestral size of Niger-Congo (NC) populations (to which Yoruba belong) to be 12,500 individuals and that of the ancestral African population to be 15,000 individuals. More recently, the analysis of 40 non-coding regions of 2 Kb *[53]* led to estimates of NC and African ancestral size to be 17,500 and 11,000 individuals, respectively, as well as a San effective size of the order of 20,000 individuals. The differences between these estimations and ours might be due to the fact that these previous analyses were based on slightly different models that assumed constant sizes for all current populations and the same population size before the split with Denisovans.

In addition, we find evidence for some asymmetrical gene flow between San and Yoruba, around 500–600 generations ago (12.5–15 Kya) under model A, and much more recently (60–80 generations ago) under model B. Interestingly, this is the only parameter common to the two models that shows such drastic difference. Despite this disparity, which could be due to the fact that we allow for earlier migration between the two metapopulations in model B, we obtain very similar estimates for the admixture rates between populations both between panels and across models. Overall, we find a slightly larger extent of gene flow from Yoruba to San than the reverse, but the confidence intervals of the two parameters seem quite overlapping under both models. Under model A, the point estimates for the divergence time T_{DIV} are much more different than what was obtained under our simulations (*Figure S8*), with a much younger divergence suggested by the San panel (2,600 generations or 65 Kya) than for the Yoruba panel (4,700 generations or 117.5 Kya). Taking the middle of the overlap between the two CI would lead to a divergence time of 4,500 generations or 112.5 Kya (*Table 2*), in keeping with a recent estimate of the divergence of Khoisan populations obtained by an ABC approach *[110 Ky, 53]*, and compatible with the divergence time estimated between San and other West African population (65–120 Ky in *[54]*, or ∼100 Ky in *[55]*). Under model B, the two estimates obtained for panel 4 and 5, show a similar discrepancy, but the estimated values are much higher (5,530 and 10,330 generations for panels 4 and 5, respectively), which can also be due to the fact that we authorize some gene flow between the two metapopulations after their divergence. If we again take the middle of the overlap between the two CI, we obtain a value of 7,500 generations (180 Kya), substantially larger than the value obtained under model A (4,500 generations).

An examination of the parameters restricted to model B suggests that the Yoruban continent expanded recently 170–300 generations ago (4250–7500 ya), from a relatively small population of 600–3600 individuals, and that the Yoruban island receives more migrants (around 18 per generation) than the San island (2–3 individuals per generation). The age of the expansion is slightly older than the divergence time between two Western Niger-Congo populations estimated previously (140 generations, *[13]*), and intermediate between the age of the Niger-Congo languages (∼10 Kya, *[56]*), and that of the Bantu expansion (∼5 Kya, *[57]*). The larger immigration rate seen in Yorubans is compatible with the fact that farmer populations generally maintain higher levels of gene flow with their neighbours than hunter-gatherers due to their larger effective size *[47]*. Note however that all parameter estimates mentioned above assume that the Denisova divergence time is correctly estimated at 16,000 generations or 400 Kya *[58]*, even though there is still a large uncertainty attached to this divergence time, which could range from 230 to 650 Kya *[58]* or even between 170 and 700 Kya in a more recent study *[59]*. Reported estimates and CI in *Table 2* do not take this uncertainty into account, and should thus be rescaled if a different divergence time between Denisovans and Humans was proposed.

Like in the case of non-ascertained data, we find that the more complex model is much better supported by the data. Even though this better fit is barely visible when considering the marginal 1D expected SFS (see *Figure S10*), this is more exactly quantified by an AIC analysis (*Table S3*) revealing that the relative likelihood of model A is close to zero for both panels when compared to model B.

## Discussion

## Estimation of demographic parameters from genomic data

We have introduced a new and flexible simulation-based approach to estimating demographic parameters. For the tested scenarios, our composite-likelihood approach is as precise as *[21]*, which is the current standard in the field. Our approach seems more robust than since it is more likely to converge towards the correct solution when starting from the same number (50) of initial conditions (see *Figures 2*, *3*, *S4*, *S5*). In terms of computational speed, point estimates are very quickly obtained by for simple models (on average 15 seconds and 6 minutes for models in *Fig. 1A and 1B*, respectively, compared to 15 minutes and 2h30 for *fastsimcoal2*, respectively). However, *fastsimcoal2* is much faster for more complex models with three populations and migration (4–5 h per run for *fastsimcoal2* for model on *Fig. 1C*, compared to 34 h on average for ). By maximizing the fit of two-dimensional SFS, *fastsimcoal2* can also explore very complex models involving more than 10 populations with migration, which cannot be tackled by any other current method. Since fastsimcoal2 and use a very similar likelihood function (see *Figure S3*), it seems that the improved convergence of our approach lies in the use of the ECM optimization scheme, which compensates for the use of non-optimal approximate likelihoods. Note that our robust ECM maximization technique and the maximization of the product of pairwise composite likelihoods could also be used by methods deriving the SFS analytically or by a diffusion approximation (like ), thus potentially enabling the analysis of models as complex as those studied here. Also note that recent progress in the computation of joint SFS using coalescent or diffusion approaches *[18]*, *[23]* have led to the development of promising demographic inference methods applied to the study of relatively complex evolutionary models *[see e.g. 24]*.

Even though different demographic trajectories can lead to exactly the same SFS in a single population *[27]*, we do not find any evidence of parameter non-identifiability in our investigated cases. This is probably because we restricted our search to a limited set of possible histories, defined by few-parameter models. Our results confirm that if the true history lies within the models considered, the parameters of relatively complex scenarios can be well recovered from the (joint) SFS. However, we must keep in mind that histories outside our model family might have identical likelihoods.

One disadvantage of our method (and of any other simulation-based method) is that we are approximating the likelihood, implying that two runs from identical initial parameter values can results in different estimations (see *Figure S2*). Using more simulations for the estimation of the likelihood would lessen but not totally suppress this problem, but our results show that our maximization procedure leads to almost completely unbiased estimates and converges to correct values. Another disadvantage of our approach is its dependence on composite likelihoods. More powerful full likelihood approaches explicitly take into account linkage disequilibrium (LD) between sites *[60]*, and therefore might reveal useful to infer recent migration events (see e.g. *[61]*). That being said, our applied data sets consist of SNPs randomly distributed across the whole genome, and so patterns of LD between sites are minimal. Whereas confidence intervals of demographic parameters based on composite likelihood ratios should in principle be too narrow (see e.g. *[21]*, *[60]*, *[62]*, *[63]*), a study based on short stretches of DNA sequences has empirically shown that they were extremely similar to those obtained by explicitly modeling patterns of recombination *[54]*. This appears unlikely to be true in general, and certainly not if products of pairwise composite likelihoods were used (as with *eq. (7)*, which was actually not used for our test cases). Similarly, the use of composite likelihoods in model tests based on AIC can overestimate the support for the most likely model *[64]*. However, the composite likelihoods in our test cases are quasi likelihoods due to the global independence between SNPs, and the differences in relative likelihood of alternative models are so huge (see *Tables S2* and *S3*) that some residual patterns of LD are unlikely to change our conclusions.

As an alternative to our composite likelihood maximization approach, Garrigan *[22]* has proposed to integrate an approximate likelihood computed in a way similar to ours into an MCMC algorithm, allowing him to get posterior distributions and credible intervals. Whereas MCMC algorithms generally assume that the likelihood is computed accurately, it has been shown that MCMC procedure should lead to correct posterior distributions even if the likelihood is approximated, provided that there is no systematic error in its computation *[65]*, *[66]*. This Bayesian approach could be worth exploring as a possible extension of our likelihood maximization procedure. However, our current implementation has the advantage of quickly getting point estimates, around which CIs can be obtained later by repeating the estimation on bootstrapped samples. For instance, a point estimate for the IM model shown in *Figure 1B* is obtained in about 2h30 on a single core machine, whereas 40–80 h are necessary to get posterior distributions for the parameters of a similar IM model from a single MCMC run using a specialized coalescent program on a multi-core machine *[see 22]*.

## Handling ascertained SNP data sets

The additional versatility of our simulation-based likelihood approach is well exemplified by its handling of ascertained SNP chips, and the inference of several parameters from the SFS under complex demographic scenarios. Previous ways of handling ascertained SNP chips either consisted in removing the bias induced by the ascertainment *[44]* or taking it into account in the estimation procedure *[39]*, *[45]*. However, these methods are usually not as general as our implementation, as they are either restricted to models including a single population *[44]*, or to the case of the sole estimation of divergence time between two populations *[45]*. Contrastingly, our method can be applied to various types of demographic models including several populations, bottlenecks and migration.

Our simulation results suggest that parameters of complex models can be correctly recovered when the ascertainment consists of randomly chosen SNPs heterozygous in a single individual (*Figures S8* and *S9*). Interestingly, we find that some parameters of unascertained populations that diverged a long time ago either with (*Figure S8*) or without (*Figure S9*) admixture can also be quite well estimated when the model is well specified. This suggests that a given ascertainment panel of the GWHO Affymetrix chip could be used to infer parameters in several related populations. It is also worth noting that our calibration of parameters relied on the assumption that the divergence time with an outgroup population was known, but a different divergence time would only require a rescaling of the estimated parameters. The use of an outgroup species with fixed divergence time is a standard way to calibrate mutation rates (as e.g. in *[21]*), but we note it could also be used within species for DNA sequence data when some uncertainty exist on mutation rates, which is currently the case in humans *[67]*, *[68]*.

Most parameters inferred from real African populations have very similar estimates and confidence intervals irrespective of which SNP panel is used (*Figure 5*, *Table 2*), which agrees with our simulation results (*Figures S8*, *S9*). However, a few parameters seem to provide relatively divergent estimates, like the Yoruba and the African ancestral size, as well as the Yoruba-San divergence time, a discrepancy that is not really expected from the simulations. This discrepancy could stem from either an unknown source of ascertainment, from a misspecification of the model for one of the two ascertained population, or from an ascertained individual that is not representative of its population, the latter case being possibly due to inbreeding or admixture. It currently appears difficult to disentangle these cases, and the inclusion of additional parameters in model B only seems to marginally improve the fit of the expected SFS to the data. It suggests that our models still do not capture all aspect of the true demography of these populations, which might also affect our ability to reproduce the ascertained SFS, and have a negative impact on our estimations. We note however that previous estimates of African demography *[e.g. 53]* are more in line with those inferred from the Yoruba than from the San panel, which could suggest that our demographic models are more appropriate for the Yoruba than for the San population. Overall, our results nevertheless show that meaningful demographic estimates can be obtained from ascertained SNP chips, suggesting a useful and cheap alternative to large scale sequencing for demographic inference.

## Application to complex demographic models

Our methodology has the potential to infer demographic parameters from large scale genomic data under a much wider range of neutral evolutionary models than either the current implementation of , current Approximate Bayesian Computation (ABC) implementations *[69]*, summary statistics based approaches *[11]*, or other existing likelihood-based methods *[22]*. Whereas ABC has the potential to be applied to genomic data, it has rarely been done since it usually requires the simulations of data sets as large as those analysed, which is computationally very costly. Our approach could thus be seen as a powerful likelihood-based alternative to the study of complex evolutionary models, which are usually only tackled by ABC approaches *[see e.g. 16]*, *[70]*, *[71]*, with the additional advantage of not having to choose which summary statistics to use for the inference, which is often a problem in ABC *[e.g. 13]*, *[72]*, *[73]*, *[74]*. Our approach can indeed tackle complex evolutionary models with a relatively large number of populations (see *Figs. 1D*, *4B* and *5B*). For instance, the model shown in *Figure 4B* includes 4 sampled populations, as well as four other unsampled populations, whose demography also needs to be reconstructed. AIC analysis reveals that the cost associated to increasing model complexity is rewarded by a much better fit to the data. One should however make a distinction between the inclusion of additional parameters for a given number of populations (e.g. adding the possibility to have gene flow between populations), and the inclusion of additional populations. The addition of unsampled or ghost populations can not only modify parameter estimations but also alter our interpretation of the results (see e.g. *[75]*, *[76]*). For instance, the inclusion of continents from which sampled populations received migrants (which is an attempt at taking into account the spatial structure of African populations) in *Figure 4B* improved the fit of expected SFS (see *Table S2*), without really modifying our estimation of the level of European admixture, but it radically changed our interpretation of the relationships between African Americans and extant African and European populations. As expected, the inclusion of a potential source of admixture for the Luhya population in model B2 improved the fit of the model and it allowed us to make inference about this ghost population, but it also modified estimated parameter values of this and other populations. These observations suggest that complex models are better studied by considering all populations simultaneously, and that a strategy consisting in estimating population-specific parameters and fixing them when incorporating additional populations would not be optimal.

There are still some limits to the complexity of models that can be studied, and AIC-like approaches can be used to study which modifications sufficiently improve the model to be preserved. However, the question of whether our best model is the true model is not addressed by model comparisons such as likelihood ratios or AIC. One would ideally like to assess how well the model explains the data, which is usually done by some posterior predictive check in a Bayesian setting *[77]*, or by getting the data p-value under a frequentist approach. We have implemented such an approach, where the model p-value was evaluated by comparing an observed G-test statistic *[3]*, *[62]* to its model distribution. As expected, this approach leads to non-significant p-values when applied to simulated data sets (*Figure S11*). However, the p-values for all models shown in *Figures 4* and *5* are highly significant (*p* = 0, *Figures S12* and *S13*) suggesting that our implemented models of human evolution are still overly simplistic. This is not surprising given the high-dimensionality of the parameter space and the large amount of SNPs at hand giving us high power to reject inaccurate hypotheses. Since models are generally expected to be wrong, the question is at what point is a model so wrong that it is no longer useful *[78, p. 74]*. The fact that the addition of plausible source of realism into our models significantly improves the fit to the data (*Tables S2* and *S3*) is reassuring in the sense that we have a methodology to refine our still imperfect evolutionary scenarios.

## Methods

## Simulation-based site frequency spectrum and likelihoood

Nielsen *[17]* has shown that one could estimate the likelihood of a demographic model , where *X* is the site frequency spectrum, on the basis of coalescent simulations. This is because the probability of a given derived allele frequency *i* is simply a ratio of branch lengths of the coalescent tree expected under model as *[17]*:

where is the total length of a set of branches directly leading to

*i*terminal nodes, and

*T*is the total tree length. This probability can then be estimated with arbitrary precision on the basis of Z simulations as

*[62]*

where is the length of the

*j*-th compatible branch in simulation

*k*(see

*Figure S1A*). Note that the estimator shown in

*eq. (2)*implicitly weights simulations according to the probability that a mutation occurs on the simulated tree. Note that an estimator of the form (as used by Garrigan

*[22]*to estimate the expected SFS) would give each tree the same weight and would thus give an excessive weight to genomic regions with shallow coalescent trees, which can be a problem for recently bottlenecked populations. If some simulated entries of the SFS were zero (because), was set to an arbitrarily small values

*[as in 22]*chosen here as .

We have empirically checked that our procedure gives the correct SFS under two simple scenarios for which the expected SFS can be obtained exactly by the method developed by Chen *[18]* for cases involving up to two populations and no migration. These scenarios were (i) a bottleneck model (as in *Fig. 1A*) and (ii) a divergence model without migration (as in *Fig. 1B* but without migration). We show in *Figures S14* and *S15* for scenarios i) and ii), respectively, the fit of the SFSs entries (estimated by our approach for different numbers of coalescent simulations) to the true SFS entries. As expected the fit improves with the number of simulations, and the estimated SFS entries are distributed symmetrically around the true values without any visible bias for these two scenarios.

## Composite likelihoods

Probabilities inferred from the simulations and *eq. (2)* can then be used to compute the composite likelihood of a given model as *[20]*

where is the SFS in a single population sample of size

*n*,

*S*is the number of polymorphic sites,

*L*is the length of the studied sequence, and is the probability of no mutation on the tree, obtained as assuming a Poisson distribution of mutations occurring at rate .

This formulation can be extended for the joint SFS of two populations as

and one can define a

*v*-dimensional SFS for more than two (

*v*) populations as

where is a composite index. However, when the number of populations in the model is larger than 2 and sample sizes are relatively large, the number of entries in the v-dimensional SFS can be huge, implying that most entries of the observed SFS will be either zero or a very small number and that the expected values for these low-count entries will be difficult to estimate precisely. In that case, we have chosen to estimate the

*v*-dimensional by collapsing all entries with observed SFS less than a predefined threshold as

When

*v*>4, this approach will also prove computationally difficult, and in that case we have chosen to compute a composite composite-likelihood (

*C2L*) obtained by multiplying all pairwise

*CL*'s, as

where is given by

*eq. (4)*.

## Maximizing the likelihood

As the likelihood is obtained by simulations, which incurs some approximation, we cannot use optimization methods based on partial derivatives. Even though other methods would be possible, we have chosen to use a conditional maximization algorithm *[ECM, 79]*, which is an extension of the EM algorithm where each parameter of the model is maximized in turn, keeping the other parameters at their last estimated value. The maximization of each parameter was done using Brent's *[80, Chapter 5]* algorithm, which is a root-finding algorithm using a combination of bisection, secant and inverse quadratic interpolation *[see e.g. 81]*. We start with initial random parameter values, and perform a series of ECM optimization cycles until estimated values stabilize or until we have reached a specified maximum number of ECM cycles (usually 20–40). Unless specified otherwise, we used 100,000 coalescent simulations for the estimation of the expected SFS and likelihood for a given set of demographic parameters. Even though a higher precision could be reached with a larger number of simulations, especially for complex models, this number appears like a good compromise between computational efficiency and likelihood estimation accuracy (see *Figure S2*). Note that the imprecision on the likelihood estimation might also prevent an efficient optimization of our parameters, as a sub-optimal parameter might give by chance a better likelihood than the optimal one during an ECM cycle. Because the composite likelihood surface might have several local maxima and be difficult to explore *[e.g. 60]*, several independent optimizations are performed (between 20 and 40 depending on the model and computation time), each starting from different initial conditions, and the overall maximum composite likelihood solution is retained.

Coalescent simulations, estimation of the SFS, likelihood computations and its maximization were all done with *fastsimcoal2*, a modified version of the *fastsimcoal* program *[82]*. *fastsimcoal2* input file format and command lines arguments are briefly described in Supplementary *Text S1*, and examples of input files are provided in Supplementary *Text S2*.

## Tested demographic models without ascertainment

We have tested our program ability to recover demographic parameters from DNA sequence data in four relatively plausible but distinct scenarios of population differentiation involving one to ten populations with migration (see *Figure 1*). In all cases, we simulated with *fastsimcoal2* 400,000 unlinked regions of 50 bp, thus totaling 20 Mb of DNA sequences, assuming a mutation rate of 2.5×10^{−8} bp^{−1} per generation and an infinite-site model. Pseudo-observed SFS were also directly computed with *fastsimcoal2*. Parameters were estimated independently from ten data sets generated under each model. For each data set generated under models with one to three populations, we performed 50 parameter estimations via ECM maximization, and each time retained the parameter set with maximum likelihood. For the model with 10 populations we only performed 20 estimations per data sets, and used 50,000 simulations instead of 100,000 for the other models to estimate the expected SFS due to long computation times. We describe the four tested models in *Figure 1*, and the used parameter values are showed as red dots in *Figures 2*, *3*, *S4* and *S5*. Absolute numbers (generations, population sizes) were obtained by assuming that the mutation rate of 2.5×10^{−8} bp^{−1} per generation was known.

As a benchmark, we used to infer the demographic parameters in scenarios shown in *Figure 1A–1C* involving up to three populations. For each generated data set, we performed 50 parameter estimations using the Broyden-Fletcher-Goldfarb-Shanno (BFGS) optimization method implemented in , and we retained the parameters associated with the maximum likelihood. We followed 's manual specification to set reasonable upper and lower bounds of the search ranges of the parameter. In all cases, the expected SFS was estimated by extrapolating the SFS inferred from 3 grid sizes set to 40, 50 and 60, which are in all cases larger than our maximum samples sizes (30 in the IM model case). The composite likelihood was computed using 's multinomial model, which is in fact a product of Poisson likelihoods, where the expected model entries are scaled to sum up to 1. This likelihood also ignores information about the expected and observed numbers of monomorphic and polymorphic sites used in our likelihood formulation (as well as in *[20]*). Therefore, the ratio should be equal to showing that barring the terms, the two *CL*s differ by a single constant value. The difference between likelihoods computed with fastsimcoal and is illustrated in *Figure S3* for the case of the bottleneck scenarios shown in *Figures 1A*. It shows that when monomorphic sites are not taken into account, *fastsimcoal* and indeed produce essentially identical likelihood profiles around true parameters. However, when monomorphic sites are used in the likelihood, the shape of the likelihood profiles differs, making it more or less peaky depending on the parameter. There is thus no clear advantage in using one or the other likelihood form for this scenario, but our use of monomorphic sites allows us to directly get absolute values of the parameters. We report in *Figures 2*, *S4* and *S5* only the results obtained for data sets for which 's best log likelihood was less than 10% lower than the largest log-likelihood obtained with the other data sets, and we considered not to have converged for the discarded data sets.

## Estimating demographic parameters from an ascertained SNP array

Recently, Affymetrix developed a new SNP array including ∼629,000 SNPs with known ascertainment scheme for population inference (Axiom Genome-Wide Human Origins 1 Array, http://www.affymetrix.com/support/technical/byproduct.affx?product=Axiom_GW_HuOrigin) *[43]*. This array, abbreviated hereafter GWHO, is made up of SNPs defined in 13 discovery panels. In the first 12 panels, SNPs have been identified by comparing the two chromosomes of an individual from a known population, further quality checks and validation on a large population sample *[43]*. The 13th panel contains SNPs that are polymorphic when comparing the Denisovan sequence and a random San chromosome. Raw genotypes from 943 unrelated individuals from more than 50 worldwide populations are freely available on ftp://ftp.cephb.fr/hgdp_supp10/.

The ascertainment scheme of this array is simple and homogeneous over a given panel. However, the SFS inferred from this array is biased as only mutations that occur in the ancestry of the two compared chromosomes will be considered (see *Figure S1B*). We show in *Figure S7* the difference between the ascertained and non-ascertained SFS under a few basic demographic scenarios in a single population. The differences between the two SFS can be quite dramatic, implying that the estimation of demographic parameters on ascertained data sets without taking the ascertainment into account is bound to lead to biased estimates. Nielsen et al. *[44]* have shown how to correct the expected SFS within a given population under such a simple ascertainment scheme, and the ascertained joint SFS could be unbiased in a similar way by taking into account ascertainment probabilities in the ascertained populations. Rather than unbiasing the SFS, we have chosen here to incorporate the bias in the model and to infer demographic parameters directly from the ascertained (joint) SFS, a strategy similar in spirit to that used by Gravel et al. *[28]* to account for biases in the SFS obtained from low-coverage next-generation sequencing data. It implies we need to model the ascertainment scheme in the coalescent simulations such as to infer the expected ascertained SFS for a given demography. In order to estimate the SFS when SNPs are defined as being sites heterozygous in a given individual, we use the following procedure: 1) we perform conventional coalescent simulations under a given demography, 2) we choose two lineages at random in the ascertained population, 3) we identify the subtree relating the chosen lineages to their most recent common ancestor (MRCA) (highlighted in blue in *Figure S1B*), 4) we update the numerator in *eq. (2)* by summing up branch lengths of the blue subtree that are ancestral to *i*_{1} lineages in population 1, *i*_{2} lineages in population 2, …, *i*_{v} lineages in population *v*, 5) The denominator of *eq. (2)* is updated by summing up the total length of the blue subtree.

Parameter optimization is then performed similarly to the unascertained case, except that the terms depending on the number of monomorphic sites () in *eq. (6)* are removed from the likelihood since only polymorphic sites are reported on the ascertained chip, which implies that we cannot use a molecular clock. Therefore, parameter absolute estimation should be done relative to an arbitrarily fixed or known parameter (e.g. population size, divergence time). Note however that a molecular clock could be used if the fraction of sites found heterozygous were known in ascertained individuals, as in this case the expected fraction of monomorphic sites would then simply be , where would be the total length of the expected ascertained tree (shown in blue in *Figure S1B*).

## Applications to human demography

## Non-ascertained human genomic data set

We illustrate the potential of our method to inferring demographic parameters from more than three populations by investigating the past demography of four populations analyzed by Complete Genomics, which sequenced the whole genome of 54 unrelated individuals from 11 populations at a depth of 51-89X per genome *[83]*. This data set was chosen as we could assume that heterozygous positions were recovered unambiguously due to the high coverage, and because it covered non-genic regions that are less sensitive to selection, and thus to bias in the site frequency spectrum *[5]*, *[84]*. We thus considered autosomal SNPs found outside genic regions (as defined by Ensembl version 71, April 2013 *[85]*, and outside CpG islands (as defined on the UCSC platform, *[86]*). The derived and ancestral states of the SNPs were inferred from the comparison with the chimpanzee and orangutan genomes, using the syntenic net alignments between hg19 and panTro2, and between hg19 and ponAbe2, both available on the UCSC platform *[86]*. We then kept the SNPs found to be polymorphic in 27 individuals from 4 samples representing African Americans (5 African Americans from Southwest United States), 2 African populations (4 Luhya from Webuye, Kenya; 9 Yoruba from Ibadan, Nigeria) and a European population (9 Utah residents with Northern and Western European ancestry from the CEPH collection). The multidimensional SFS for these four populations was inferred from a total of 239,120 independent SNPs located more than 5 Kb apart from each other, to minimize linkage disequilibrium.

We then considered several demographic scenarios accounting for the pattern of genomic diversity found in these samples (see *Figure 4*). The first investigated scenario A is shown in *Figure 4A*. It is a relatively simple scenario, with 12 parameters, which assumes a divergence between the European and an ancestral African population to have occurred 50 Kya *[28]*, *[48]*, and this date is used to calibrate the other parameters. The two Niger-Congo (NC) speaking populations (YRI and LWK) are assumed to have diverged T_{NC} generations ago, and each NC population has a different constant effective size since then. The two African populations are then assumed to have contributed to the founding of the African-American population (ASW) 16 generations ago (around 1800, assuming 25 years per generation). The African population is also considered to have gone through a bottleneck T_{BOT} generations ago with a reduced population size N_{BOT} for 100 generations (as it is the bottleneck intensity N_{BOT}/100 and not its duration that conditions genetic diversity).

We have also considered two alternative and more realistic scenarios of human evolution, but requiring more parameters to estimate (16 and 19 for models B1 and B2 in *Figure 4*, respectively) and additional unsampled populations (3 and 4, respectively). The main difference with the previous model A is that we assume that the European and the two NC samples belong to two different subdivided populations modeled here as continent-island systems. These continent-island models are equivalent to infinite-island models *[e.g. 87]*, and have been shown to well approximate patterns of diversity after range expansions *[47]*. In this model, the CEU population receives migrants from a European continent, which is also the source of admixture of the African-American ASW population. The ASW population has also received an initial genetic contribution 16 generations ago from a Niger-Congo “continent”, which is also the source of gene flow to the two NC populations. These two continents are assumed to have diverged some time ago from an African population, and here again this time is fixed to 2000 generations for the European continent, whereas this time is estimated for the NC continent. For simplicity, all islands are assumed to have been formed 100 generations ago, which is thus the assumed duration of the scattering phase *sensu* Wakeley *[88]*. It implies that in the backward coalescent process, all genes remaining in the islands are transferred to the continents 100 generations ago. Note that we also allow for bottlenecks of size (N_{BNC} and N_{BEUR}) to have occurred for 100 generations in the NC and European continents, respectively. Like in the model shown in *Figure 4A*, we allow for a different population size (N_{ANC}) of the ancestral population some T_{BOT} generations ago. In our most complex model B2, we include a potential admixture of the Luhya population with an unsampled (potentially East African) population, which contributed with a proportion a_{EA} to the initial Luhya population 100 generations ago. In the simpler model B1, the Luhya population is not considered as admixed and only receives genes from the NC continent, and this model thus has 3 parameters less (16) than our model B1 (19).

Parameter estimations were performed from the multidimensional SFS, without considering the number of monomorphic sites, which were not available in the VCF files from Complete Genomics. Fixing African-European divergence time and African-American admixture times nevertheless allowed us to get absolute values for the other parameters. In addition to ignoring terms in from *equation (6)* (command line option –0 of fastsimcoal2), we also collapsed all SFS entries less than 5 in a single category (command line option –C5 of fastsimcoal2). Maximum CL parameters were obtained after 40 cycles of the ECM algorithm, starting with 50,000 coalescent simulations per likelihood estimations, and ending with 250,000 simulations per likelihood estimation.

## SNP chip data sets with known ascertainment

We applied our approach to infer the demographic history from ascertained SNP chips to the case of the divergence between two African populations, the Yoruba from Ibadan (Nigeria) and a hunter-gatherer San population from Southern Africa, where one individual from each population was included in the Affymetrix ascertainment panels. We can thus use the Affymetrix panel 4 (San ascertained) and panel 5 (Yoruba ascertained) to perform separate estimations that can be compared to each other. The assumed models of African population divergence we analysed are shown in *Figure 5*. In the simple model shown in *Figure 5A*, the 12 San and 44 Yoruban individuals were assumed to be drawn from two currently large populations that expanded recently from two ancestral populations that diverged T_{DIV} generations ago. We also allowed the Yoruba and San populations to have had a single pulse of bi-directional and potentially asymmetrical gene flow. As mentioned above, the use of SNPs does not allow us to get absolute dates due to the absence of a mutation clock. We therefore included the Denisova population (and its SNP data) in our model, and assumed that it diverged 400,000 years ago *[58]* (or 16,000 generations assuming a 25 y generation time) to calibrate our estimates. Note that an absolute dating would have also been possible if the total number of heterozygous sites per ascertained individual had been know or made available. In model B shown in *Figure 5B*, we use a more complex scenario describing the divergence of two continent-island metapopulations, in a way similar to models in *Figure 5B*. In this case we assume that the Yoruba and San sampled populations receive 2 Nm genes per generation from their respective continents, which diverged T_{DS} generations ago. At that time the San population began an exponential growth, whereas the exponential growth of the Yoruban continent was allowed to start later, T_{EY} generations ago. Note also that in Model B, the Ancestral Yoruban population and the San population can continuously exchange migrants during the period between T_{EY} and T_{DS}.

Panels 4 and 5 originally contained 163,313 and 124,125 SNPs, respectively. From this we discarded all CpG SNPs potentially target of multiple hits (N. Patterson, personal communication), as well as all SNP positions with missing data in either Denisova, Yoruba or San samples, which finally left us with 109,020 and 81,383 SNPs in panels 4 and 5, respectively. The SNP ancestral states were assumed to be those present in the chimpanzee outgroup, as provided in the HGDP data set. With this choice, it is possible that some ancestral states are mis-specified (due to recurrent mutations or incomplete lineage sorting in both humans and chimps). Such misspecifications can artificially increase the observation of high-frequency derived allele classes, a signal that can wrongly be taken as the effect of selection *[63]*. However, this problem is relatively unlikely here, as such mis-identification should be more frequent at CpG SNPs, which were removed from our data set. Moreover, the observed SFS for both panels do not show a particular excess of high frequency derived alleles (see *Figure S10*). Parameter confidence intervals were obtained 100 parametric bootstrap, simulating SFS with the same number of SNPs from the CML estimates and re-estimating parameters each time. Parameters were estimated from 30 starting conditions for each original data set as well as for the 100 bootstrapped SFS data sets. Parameters associated with the maximum CL computed from *eq. (6)* without terms in were retained after 20 cycles of the ECM algorithm were retained. One hundred thousand coalescent simulations were used to estimate the expected joint ascertained SFSs, and a threshold *ε* value of 2 was used for pooling rarely observed SFS entries in a single category, as in *eq. (6)* above.

## Assessing the accuracy of estimations from ascertained SNP panels

In order to see if the 12 parameters of model A could be correctly recovered by our approach, we simulated 10 data sets under the model shown in *Figure 5A* using fixed parameter values, as reported in *Figure S8*. We simulated 20 Mb of DNA sequence data under the selected scenario and retained all SNPs that were heterozygous in an arbitrary individual from the ascertained population (pseudo-San or pseudo-Yoruba), adjusting the mutation rate to get approximately 100,000 SNPs to match the observed data. We also simulated ascertained SNP data sets under a slightly simpler scenario, removing any admixture event between Yoruba and San ancestors, as shown in *Figure S9*.

Parameters were estimated for the 10 data sets generated for each panel and results were reported in *Figures S8* and *S9*.

## Model comparisons

As mentioned in the next section on model test, it might be difficult to accept a simple model with a G-test based on tens of thousands of polymorphic sites, but in that case, it might be better to establish a procedure allowing one to improve models, by progressively adding some realism to simple models *[89]*. Our likelihood-based approach would in principle lend itself to model comparison through likelihood-ratios for nested models or through Akaike Information Criterion (AIC, *[52]*) for other model comparisons. However, we are here confronted with two distinct problems. The first one affects all composite likelihood approaches and due to the fact that the distribution of the composite likelihood ratio test (CLRT) is generally unknown. When the SFS is obtained from DNA sequences with relatively large levels of linkage disequilibrium, it has been proposed to obtain an empirical distribution of the CLRT by simulation of DNA sequences with recombination (e.g. *[54]*, *[90]*). In the case of the *AIC*, Varin and Vidoni *[91]* have proposed to replace the number of parameter *d* of a given model in by an effective number of parameters that needs to be computed from a sensitivity matrix and Godambe Information matrix, which might be difficult to do in practice. We note however that in our two applied examples the SFS is computed from a collection of SNPs randomly distributed across the genome, such that we shall conservatively assume that the CL computed from the multidimensional SFS is close to a true likelihood. Note that this assumption would not be valid if one had computed a composite likelihood based on the product of pairwise composite likelihoods, like in *eq. (7)*. The second problem is linked to the fact that we estimate the likelihood with some error (*Figure S2*). As noted previously, this can prevent us to efficiently optimize our parameters, but it also means that the likelihood ratios or AIC statistics are imprecisely estimated. To address this problem, we have compared models on the basis of the maximum value of the likelihood obtained over 100 estimations performed for the ML parameters obtained by our optimization procedure. We then calculated the relative likelihood or the Akaike's weight of evidence in favor of the *i*-th model as (see e.g. *[89]*)

where .

## Model test

Even though we can estimate parameters under any model, it can be useful to check how data fit the chosen model. To this aim we use an approach based on a likelihood ratio G-statistic *[3]*, *[62]* of the form , where *CL _{0}* is the observed maximum composite likelihood where the expected SFS is replaced by the relative observed SFS in

*eqs. 3*,

*5*or

*7*, and

*CL*is the estimated composite maximum likelihood computed using the procedure described above. We obtain the null distribution of the

_{E}*CLR*statistic by the same parametric bootstrap procedure used to infer confidence intervals, where we generate by simulation a number of data sets using the estimated maximum-likelihood parameters of the model, and each time perform parameter estimations and estimate the CLR statistic. We can compute the p-value of the observed CLR statistic from this null distribution. Note that this type of G-test has been used before to find genomic regions under selection

*[3]*,

*[62]*.

We report in *Figure S11* the null distributions of the CLR and the p-values of two data sets generated under models shown in *Figure 1A and 1B*. In both cases, the p-values are not significant confirming that the data sets are compatible with the tested models.

Note however that a non-significant p-value is not an absolute proof that the tested model is correct, as there could be a large number of models leading to similar SFSs, as was shown previously *[27]*, but it is an indication that the observed SFS is well explained by the model.

However, in applied cases, we actually expect that this test leads to very significant values, since the true history of the populations is completely unspecified and our models are certainly overly simple and potentially far from reality.

## Supporting Information

##### Zdroje

1. NielsenR, HellmannI, HubiszM, BustamanteC, ClarkAG (2007) Recent and ongoing selection in the human genome. Nat Rev Genet 8: 857–868.

2. KelleyJL, MadeoyJ, CalhounJC, SwansonW, AkeyJM (2006) Genomic signatures of positive selection in humans and the limits of outlier approaches. Genome Res 16: 980–989.

3. NielsenR, WilliamsonS, KimY, HubiszMJ, ClarkAG, et al. (2005) Genomic scans for selective sweeps using SNP data. Genome Res 15: 1566–1575.

4. BeaumontMA, NicholsRA (1996) Evaluating loci for use in the genetic analysis of population structure. Proceedings of the Royal Society London B 263: 1619–1626.

5. BoykoAR, WilliamsonSH, IndapAR, DegenhardtJD, HernandezRD, et al. (2008) Assessing the evolutionary impact of amino acid mutations in the human genome. PLoS Genet 4: e1000083.

6. KuhnerMK, BeerliP, YamatoJ, FelsensteinJ (2000) Usefulness of Single Nucleotide Polymorphism Data for Estimating Population Parameters. Genetics 156: 439–447.

7. BeerliP, FelsensteinJ (2001) Maximum likelihood estimation of a migration matrix and effective population sizes in n subpopulations by using a coalescent approach. Proceedings of the National Academy of Sciences USA 98: 4563–4568.

8. HeyJ, NielsenR (2007) Integration within the Felsenstein equation for improved Markov chain Monte Carlo methods in population genetics. Proc Natl Acad Sci U S A 104: 2785–2790.

9. HeyJ (2010) Isolation with migration models for more than two populations. Mol Biol Evol 27: 905–920.

10. BecquetC, PrzeworskiM (2007) A new approach to estimate parameters of speciation models with application to apes. Genome Res 17: 1505–1519.

11. NaduvilezhathL, RoseLE, MetzlerD (2011) Jaatha: a fast composite-likelihood approach to estimate demographic parameters. Mol Ecol 20: 2709–2723.

12. LeuenbergerC, WegmannD (2010) Bayesian computation and model selection without likelihoods. Genetics 184: 243–252.

13. WegmannD, LeuenbergerC, ExcoffierL (2009) Efficient approximate Bayesian computation coupled with Markov chain Monte Carlo without likelihood. Genetics 182: 1207–1218.

14. BeaumontMA, CornuetJ-M, MarinJ-M, RobertCP (2009) Adaptive approximate Bayesian computation. Biometrika 96: 983–990.

15. ExcoffierL, EstoupA, CornuetJ-M (2005) Bayesian Analysis of an Admixture Model With Mutations and Arbitrarily Linked Markers. Genetics 169: 1727–1738.

16. BeaumontMA, ZhangW, BaldingDJ (2002) Approximate Bayesian computation in population genetics. Genetics 162: 2025–2035.

17. NielsenR (2000) Estimation of population parameters and recombination rates from single nucleotide polymorphisms. Genetics 154: 931–942.

18. ChenH (2012) The joint allele frequency spectrum of multiple populations: a coalescent theory approach. Theor Popul Biol 81: 179–195.

19. MarthGT, CzabarkaE, MurvaiJ, SherryST (2004) The Allele Frequency Spectrum in Genome-Wide Human Variation Data Reveals Signals of Differential Demographic History in Three Large World Populations. Genetics 166: 351–372.

20. AdamsAM, HudsonRR (2004) Maximum-likelihood estimation of demographic parameters using the frequency spectrum of unlinked single-nucleotide polymorphisms. Genetics 168: 1699–1712.

21. GutenkunstRN, HernandezRD, WilliamsonSH, BustamanteCD (2009) Inferring the joint demographic history of multiple populations from multidimensional SNP frequency data. PLoS genetics 5: e1000695.

22. GarriganD (2009) Composite likelihood estimation of demographic parameters. BMC genetics 10: 72.

23. LukicS, HeyJ, ChenK (2011) Non-equilibrium allele frequency spectra via spectral methods. Theoretical population biology 79: 203–219.

24. LukicS, HeyJ (2012) Demographic inference using spectral methods on SNP data, with an analysis of the human out-of-Africa expansion. Genetics 192: 619–639.

25. LiH, DurbinR (2011) Inference of human population history from individual whole-genome sequences. Nature 475: 493–496.

26. GronauI, HubiszMJ, GulkoB, DankoCG, SiepelA (2011) Bayesian inference of ancient human demography from individual genome sequences. Nat Genet 43: 1031–1034.

27. MyersS, FeffermanC, PattersonN (2008) Can one learn history from the allelic spectrum? Theoretical population biology 73: 342–348.

28. GravelS, HennBM, GutenkunstRN, IndapAR, MarthGT, et al. (2011) Demographic history and rare allele sharing among human populations. Proc Natl Acad Sci U S A 108: 11983–11988.

29. TennessenJA, BighamAW, O'ConnorTD, FuW, KennyEE, et al. (2012) Evolution and functional impact of rare coding variation from deep sequencing of human exomes. Science 337: 64–69.

30. SousaV, HeyJ (2013) Understanding the origin of species with genome-scale data: modelling gene flow. Nat Rev Genet 14: 404–414.

31. YiX, LiangY, Huerta-SanchezE, JinX, CuoZX, et al. (2010) Sequencing of 50 human exomes reveals adaptation to high altitude. Science 329: 75–78.

32. NielsenR, KorneliussenT, AlbrechtsenA, LiY, WangJ (2012) SNP calling, genotype calling, and sample allele frequency estimation from New-Generation Sequencing data. PloS one 7: e37558.

33. DurbinRM, AbecasisGR, AltshulerDL, AutonA, BrooksLD, et al. (2010) A map of human genome variation from population-scale sequencing. Nature 467: 1061–1073.

34. CrawfordJE, LazzaroBP (2012) Assessing the accuracy and power of population genetic inference from low-pass next-generation sequencing data. Front Genet 3: 66.

35. NielsenR, PaulJS, AlbrechtsenA, SongYS (2011) Genotype and SNP calling from next-generation sequencing data. Nat Rev Genet 12: 443–451.

36. LynchM (2009) Estimation of allele frequencies from high-coverage genome-sequencing projects. Genetics 182: 295–301.

37. KimSY, LohmuellerKE, AlbrechtsenA, LiY, KorneliussenT, et al. (2011) Estimation of allele frequency and association mapping using next-generation sequencing data. BMC Bioinformatics 12: 231.

38. JohnsonPL, SlatkinM (2006) Inference of population genetic parameters in metagenomics: a clean look at messy data. Genome Res 16: 1320–1327.

39. WollsteinA, LaoO, BeckerC, BrauerS, TrentRJ, et al. (2010) Demographic history of Oceania inferred from genome-wide data. Current biology : CB 20: 1983–1992.

40. AlbrechtsenA, NielsenFC, NielsenR (2010) Ascertainment biases in SNP chips affect measures of population divergence. Mol Biol Evol 27: 2534–2547.

41. ClarkAG, HubiszMJ, BustamanteCD, WilliamsonSH, NielsenR (2005) Ascertainment bias in studies of human genome-wide polymorphism. Genome Res 15: 1496–1502.

42. PattersonN, MoorjaniP, LuoY, MallickS, RohlandN, et al. (2012) Ancient admixture in human history. Genetics 192: 1065–1093.

43. Lu Y, Patterson N, Zhan Y, Mallick S, Reich D (2011) Technical design document for a SNP array that is optimized for population genetics. Available: ftp://ftp.cephb.fr/hgdp_supp10/8_12_2011_Technical_Array_Design_Document.pdf

44. NielsenR, HubiszMJ, ClarkAG (2004) Reconstituting the Frequency Spectrum of Ascertained Single-Nucleotide Polymorphism Data. Genetics 168: 2373–2382.

45. PickrellJK, PattersonN, BarbieriC, BertholdF, GerlachL, et al. (2012) The genetic prehistory of southern Africa. Nature communications 3: 1143.

46. WakeleyJ, HeyJ (1997) Estimating ancestral population parameters. Genetics 145: 847–855.

47. ExcoffierL (2004) Patterns of DNA sequence diversity and genetic structure after a range expansion: lessons from the infinite-island model. Mol Ecol 13: 853–864.

48. FagundesNJ, RayN, BeaumontM, NeuenschwanderS, SalzanoFM, et al. (2007) Statistical evaluation of alternative models of human evolution. Proc Natl Acad Sci U S A 104: 17614–17619.

49. ZakhariaF, BasuA, AbsherD, AssimesTL, GoAS, et al. (2009) Characterizing the admixed African ancestry of African Americans. Genome Biol 10: R141.

50. SjodinP, SjostrandAE, JakobssonM, BlumMG (2012) Resequencing data provide no evidence for a human bottleneck in Africa during the penultimate glacial period. Mol Biol Evol 29: 1851–1860.

51. HennBM, GignouxCR, JobinM, GrankaJM, MacphersonJM, et al. (2011) Hunter-gatherer genomic diversity suggests a southern African origin for modern humans. Proc Natl Acad Sci U S A 108: 5154–5162.

52. AkaikeH (1974) New Look at Statistical-Model Identification. Ieee Transactions on Automatic Control Ac19: 716–723.

53. VeeramahKR, WegmannD, WoernerA, MendezFL, WatkinsJC, et al. (2012) An early divergence of KhoeSan ancestors from those of other modern humans is supported by an ABC-based analysis of autosomal resequencing data. Molecular biology and evolution 29: 617–630.

54. HammerMF, WoernerAE, MendezFL, WatkinsJC, WallJD (2011) Genetic evidence for archaic admixture in Africa. Proc Natl Acad Sci U S A 108: 15123–15128.

55. SchlebuschCM, SkoglundP, SjodinP, GattepailleLM, HernandezD, et al. (2012) Genomic Variation in Seven Khoe-San Groups Reveals Adaptation and Complex African History. Science 338: 374–379.

56. DimmendaalGJ (2008) Language Ecology and Linguistic Diversity on the African Continent. Language and Linguistics Compass 840–858.

57. EhretC (2001) Bantu expansions: Re-envisioning a central problem of early African history. International Journal of African Historical Studies 34: 5–41.

58. ReichD, GreenRE, KircherM, KrauseJ, PattersonN, et al. (2010) Genetic history of an archaic hominin group from Denisova Cave in Siberia. Nature 468: 1053–1060.

59. MeyerM, KircherM, GansaugeMT, LiH, RacimoF, et al. (2012) A high-coverage genome sequence from an archaic Denisovan individual. Science 338: 222–226.

60. AutonA, McVeanG (2007) Recombination rate estimation in the presence of hotspots. Genome Research 17: 1219–1227.

61. JenkinsPA, SongYS, BremRB (2012) Genealogy-based methods for inference of historical recombination and gene flow and their application in Saccharomyces cerevisiae. PloS one 7: e46947.

62. NielsenR, HubiszMJ, HellmannI, TorgersonD, AndresAM, et al. (2009) Darwinian and demographic forces affecting human protein coding genes. Genome Res 19: 838–849.

63. HernandezRD, WilliamsonSH, BustamanteCD (2007) Context dependence, ancestral misidentification, and spurious signatures of natural selection. Mol Biol Evol 24: 1792–1800.

64. VarinC, ReidN, FirthD (2011) An Overview of Composite Likelihood Methods. Statistica Sinica 21: 5–42.

65. BeaumontMA (2003) Estimation of population growth or decline in genetically monitored populations. Genetics 164: 1139–1160.

66. AndrieuC, RobertsGO (2009) The Pseudo-Marginal Approach for Efficient Monte Carlo Computations. Annals of Statistics 37: 697–725.

67. KongA, FriggeML, MassonG, BesenbacherS, SulemP, et al. (2012) Rate of de novo mutations and the importance of father's age to disease risk. Nature 488: 471–475.

68. ScallyA, DurbinR (2012) Revising the human mutation rate: implications for understanding human evolution. Nature reviews Genetics 13: 745–753.

69. LiS, JakobssonM (2012) Estimating demographic parameters from large-scale population genomic data using Approximate Bayesian Computation. BMC genetics 13: 22.

70. CsilleryK, BlumMG, GaggiottiOE, FrancoisO (2010) Approximate Bayesian Computation (ABC) in practice. Trends in ecology & evolution 25: 410–418.

71. LopesJS, BeaumontMA (2010) ABC: a useful Bayesian tool for the analysis of population data. Infection, genetics and evolution : journal of molecular epidemiology and evolutionary genetics in infectious diseases 10: 826–833.

72. AeschbacherS, BeaumontMA, FutschikA (2012) A novel approach for choosing summary statistics in approximate Bayesian computation. Genetics 192: 1027–1047.

73. NunesMA, BaldingDJ (2010) On optimal selection of summary statistics for approximate Bayesian computation. Statistical applications in genetics and molecular biology 9: Article34.

74. SousaVC, FritzM, BeaumontMA, ChikhiL (2009) Approximate bayesian computation without summary statistics: the case of admixture. Genetics 181: 1507–1519.

75. BeerliP (2004) Effect of unsampled populations on the estimation of population sizes and migration rates between sampled populations. Mol Ecol 13: 827–836.

76. SlatkinM (2005) Seeing ghosts: the effect of unsampled populations on migration rates estimated for sampled populations. Mol Ecol 14: 67–73.

77. GelmanA, MengXL, SternH (1996) Posterior predictive assessment of model fitness via realized discrepancies. Statistica Sinica 6: 733–760.

78. Box GEP, Draper NR (1987) Empirical model-building and response surfaces. New York; Chichester etc.: J. Wiley. XIV, 669 pp.

79. MengXL, RubinDB (1993) Maximum likelihood estimation via the ECM algorithm: A general framework. Biometrika 80: 267–278.

80. Brent RP (1973) Algorithms for Minimization without Derivatives. Englewood Cliffs, NJ: Prentice-Hall.

81. Press WH, Teukolsky SA, Vetterling WT, Flannery BP (2007) Numerical Recipes in C++: The Art of Scientific Computing. Cambridge: Cambridge University Press. 1256 p.

82. ExcoffierL, FollM (2011) fastsimcoal: a continuous-time coalescent simulator of genomic diversity under arbitrarily complex evolutionary scenarios. Bioinformatics 27: 1332–1334.

83. DrmanacR, SparksAB, CallowMJ, HalpernAL, BurnsNL, et al. (2010) Human genome sequencing using unchained base reads on self-assembling DNA nanoarrays. Science 327: 78–81.

84. O'FallonB (2013) Purifying selection causes widespread distortions of genealogical structure on the human×chromosome. Genetics 194: 485–492.

85. BirneyE, AndrewsD, BevanP, CaccamoM, CameronG, et al. (2004) Ensembl 2004. Nucleic acids research 32: D468–470.

86. Karolchik D, Hinrichs AS, Kent WJ (2012) The UCSC Genome Browser. Current protocols in bioinformatics/editoral board, Andreas D Baxevanis [et al] Chapter 1: Unit1 4.

87. BeaumontMA (2004) Recent developments in genetic data analysis: what can they tell us about human demographic history? Heredity 92: 365–379.

88. WakeleyJ (1999) Nonequilibrium migration in human history. Genetics 153: 1863–1871.

89. JohnsonJB, OmlandKS (2004) Model selection in ecology and evolution. Trends in ecology & evolution 19: 101–108.

90. ZhuL, BustamanteCD (2005) A composite-likelihood approach for detecting directional selection from DNA sequence data. Genetics 170: 1411–1421.

91. VarinC, VidoniP (2005) A note on composite likelihood inference and model selection. Biometrika 92: 519–528.

##### Štítky

Genetika Reprodukční medicínaČlánek vyšel v časopise

### PLOS Genetics

2013 Číslo 10

Nejčtenější v tomto čísle

Tomuto tématu se dále věnují…

- Eleven Candidate Susceptibility Genes for Common Familial Colorectal Cancer
- The Histone H3 K27 Methyltransferase KMT6 Regulates Development and Expression of Secondary Metabolite Gene Clusters
- Genome-Wide and Cell-Specific Epigenetic Analysis Challenges the Role of Polycomb in Spermatogenesis
- Cooperation between RUNX1-ETO9a and Novel Transcriptional Partner KLF6 in Upregulation of in Acute Myeloid Leukemia