#PAGE_PARAMS# #ADS_HEAD_SCRIPTS# #MICRODATA#

The Effect of Disinfectants on the Properties of Dental Impression Materials


Authors: R. Vrbová;  V. Fialová;  P. Bradna;  D. Houšová
Authors‘ workplace: Stomatologická klinika 1. LF UK a VFN, Praha
Published in: Česká stomatologie / Praktické zubní lékařství, ročník 116, 2016, 3, s. 73-81
Category: Original Article – Experimental Study

Overview

Introduction:
The disinfection of dental impressions is necessary in terms of preventing the transmission of infection from patients’ blood or saliva before processing at a dental office or laboratory. The adverse effects of the disinfection process can result in dimensional changes of the dental impressions, a change in surface quality and loss of the ability to reproduce the details of hard and soft tissues in the oral cavity. All these potential negative effects can ultimately influence the final prosthetic work.

Aim:
This study aimed to assess “in vitro” the impact of several commercially available disinfectants on detail reproduction and the dimensional changes of dental impressions made from various types of dental impression materials and their compatibility with dental gypsums.

Methods:
In this study alginate (Ypeen, Alligat fast set, Elastic Cromo) and elastomer (Variotime Medium Flow, Xantropren L blue, Impregum Soft) dental impression materials in combination with four disinfectants (Aseptoprint Liquid, Zeta 7 solution, Silosept, Dentaclean Form ) and gypsums type 3 (Mramorit Blue) and type 4 (BegoStone plus) were tested. The methods were executed using technical standards ČSN EN 21563 Dental alginate impression materials and ČSN EN ISO 4823 Dental elastomeric impression materials. Detailed reproduction of the dental impressions, their dimensional changes and compatibility with gypsum were evaluated on the impressions of the metal block with lines of defined dimensions. Dimensional change was defined as the percentual change of the distance between lines reproduced on disinfected impressions and the lines of defined dimensions on the metal block. The results were statistically analysed using Statistica 12 software (StatSoft Inc., Tulsa, USA). Two-factor and one-factor analysis of variance ANOVA with Tukey HSD post-hoc tests at the significance level of 0,05 % were used.

Results:
The detail reproduction of dental impressions and their compatibility with gypsum worsened when the alginate impression materials were combined with disinfectant Dentaclean Form. The surface of other tested impression materials remained unchanged after disinfection, as were the reproduction of details and compatibility with gypsum. Dimensional changes after disinfection were the highest in alginate material Elastic Cromo and the shortest in polyether material Impregum Soft.

Conclusion:
The disinfection of dental impressions is currently a necessary step before further processing in dental laboratories. However, it was confirmed that the desired properties of impressions may be negatively affected by disinfectant, particularly in the case of alginate materials. It is therefore always important to approach the selection of specific disinfectant with respect to the manufacturer’s recommendations and the available information regarding this issue.

KEYWORDS:
dental impression material – disinfectant – detail reproduction – compatibility with gypsum – linear dimensional change


Sources

1. Al-Jabrah, O., Al-Shumailan, Y., Al-Rashdan, M.: Anti-microbial effect of 4 disinfectants on alginate, polyether, and polyvinyl siloxane impression materials. Int. J. Prosthodont., roč. 20, 2007, č. 3, s. 299–307.

2. Almortadi, N., Chadwick, R. G.: Disinfection of dental impressions – compliance to accepted standards. Br. Dent. J., roč. 209, 2010, č. 12, s. 607–611.

3. Amalan, A., Ginjupalli, K., Upadhya, N.: Evaluation of properties of irreversible hydrocolloid impression materials mixed with disinfectant liquids. Dent. Res. J. (Isfahan), roč. 10, 2013, č. 1, s. 65–73.

4. Badrian, H., Ghasemi, E., Khalighinejad, N., Hosseini, N..: The effect of three different disinfection materials on alginate impression by spray method. ISRN Dent., 2012, s. 1–5.

5. Carvalhal, C. I. O., de Melo, J. A. N., Sobrinho, L. C., Correr, A.B., Sinhoreti, M. A. C.: Dimensional change of elastomeric materials after immersion in disinfectant solutions for different times. J. Contemp. Dent. Pract., roč. 12, 2011, č. 4, s. 252–258.

6. Correia-Sousa, J., Tabaio, A. M., Silva, A., et al.: The effect of water and sodium hypochlorite disinfection on alginate impressions. Rev. Port. Estomatol. Med. Dent. Cir. Maxilofac., roč. 54, 2013, č. 1, s. 8–12.

7. Guiraldo, R. D., Borsato, T. T., Berger, S. B., et al.: Surface detail reproduction and dimensional accuracy of stone models: influence of disinfectant solutions and alginate impression mate-rials. Braz. Dent. J., roč. 23, 2012, č. 4, s. 417–421.

8. Johnson, G. H., Chellis, K. D., Gordon, G. E., Lepe, X.: Dimensional stability and detail reproduction of irreversible hydrocolloid and elastomeric impressions disinfected by immersion. J. Prosthet. Dent., roč. 79, 1998, č. 4, s. 446–453.

9. Lepe, X., Johnson, G. H., Berg, J. C., Aw, T. C.: Effect of mixing technique on surface characteristics of impression materials. J. Prosthet. Dent ., roč. 79, 1998, č. 5, s. 495–502.

10. Lepe, X., Johnson, G. H., Berg, J. C., Aw, T. C., Stroh, G. S.: Wettability, imbibition, and mass change of disinfected low-viscosity impression materials. J. Prosthet. Dent ., roč. 88, 2002, č. 3, s. 268–276.

11. Lynch, D., Allen, P. F.: Quality of written prescriptions and master impressions for fixed and removable prosthodontics: a comparative study. Br. Dent. J., roč. 198, 2005, č. 1, s. 17–20.

12. Martin, N., Martin, M. V., Jedynakiewicz, N. M.: The dimensional stability of dental impression materials following immersion in disinfecting solutions. Dent. Mater., roč. 23, 2007, č. 6, s. 760–768.

13. Muzaffar, D., Braden M., Parker, S., Patel, M. P.: The effect of disinfecting solutions on the dimensional stability of dental alginate impression materials. Dent. Mater., roč. 28, 2012, č. 7, s. 749–755.

14. Nallamuthu, N. A., Braden, M., Patel, M. P.: Some aspects of the formulation of alginate dental impression materials – setting characteristics and mechanical properties. Dent. Mater., roč. 28, 2012, č. 7, s. 756–762.

15. Nassar, U., Aziz, T., Flores-Mir, C.: Dimensional stability of irreversible hydrocolloid impression materials as a function of pouring time: a systematic review. J. Prosthet. Dent., roč. 106, 2011, č. 2, s. 126–133.

16. Rad, F. H., Ghaffari, T., Safavi, S. H.: In vitro evaluation of dimensional stability of alginate impressions after disinfection by spray and immersion methods. J. Dent. Res. Dent. Clin. Dent. Prospects, roč. 4, 2010, č. 4, s. 130–135.

17. Shetty, S., Kamat, G., Shetty, R.: Wettability changes in polyether impression materials subjected to immersion disinfection. Dent. Res. J. (Isfahan), roč. 10, 2013, č. 4, s. 539–544.

18. Sinobad, T., Obradović-Djuričić, K., Nikolić, Z., et al.: The effect of disinfectants on dimensional stability of addition and condensation silicone impressions. Vojnosanit Pregl., roč. 71, 2014, č. 3, s. 251–258.

19. Suprono, M. S., Kattadiyil, T., Goodacre, C. J., et al.: Effect of disinfection on irreversible hydrocolloid and alternative impression materials and the resultant gypsum casts. J. Prosthet. Dent., roč. 108, 2012, č. 4, s. 250–258.

20. Wang, J., Wan, Q., Chao, Y., et al.: A self-disinfecting irreversible hydrocolloid impression material mixed with chlorhexidine solution. Angle Orthod., roč. 77, 2007, č. 5, s. 894–900.

Labels
Maxillofacial surgery Orthodontics Dental medicine
Login
Forgotten password

Enter the email address that you registered with. We will send you instructions on how to set a new password.

Login

Don‘t have an account?  Create new account

#ADS_BOTTOM_SCRIPTS#